INVISCAN China 3 Axis Galvo Scanner Ka VCM Motor
High Speed 3 Axis Galvo Scan Hlooho e nang le VMC Motor bakeng sa ho tšoaea, ho seha, ho cheselletsa ...
Hlooho ea InVISCAN Series 3D laser galvo scanner e na le axis ea XYZ.Z-axis e sebetsa e le sesupa-tsela, se tla fetola sebaka sa ho sebetsa pakeng tsa lense ea f-theta le lintho ho latela bophahamo ba ntho.Ka ho sebetsa le molaoli oa DLC2-M4-3D le software ea EZCAD3, ts'ebetso ea laser joalo ka ho tšoaea e ka etsoa habonolo le ka katleho.
*Sekhahla se phahameng: Lebelo la ho skena> 10000mm / S
* Ho feta moo: Pheta-pheta <2um
*E tsitsitseng: Nako e telele ea mocheso oa mocheso <5urad
*Ho tšoana: Phoso ea bophara ba sebaka ka har'a sebaka sa ts'ebetso <19%
* Ho feta moo: Pheta-pheta <2um
*E tsitsitseng: Nako e telele ea mocheso oa mocheso <5urad
*Ho tšoana: Phoso ea bophara ba sebaka ka har'a sebaka sa ts'ebetso <19%
Litšoantšo tsa lihlahisoa
Litlhaloso
| A1064-10 | A355-14A | 355-10A | 1064-14A | |
| Beam Aperture | 10 limilimithara | 14 limilimithara | 10 limilimithara | 14 limilimithara |
| Wavelength | 1030-1070nm | 355nm | ||
| Lebelo le Leholo la ho Tšoaea | 450cps/s | 700cps/s | 450cps/s | 700cps/s |
| Positioning Speed | 7m/s | 10m/s | 7m/s | 10m/s |
| Phoso ea ho Lata | 0.3ms | 0.18ms | 0.3ms | 0.18ms |
| Phethahatso ea ho Tšoaea e Phethahetseng | <2 μrad | |||
| Long Drift(>8h) | <5urad | |||
| Operating Deflection Angle | ±20° | |||
| Karolelano ea Katoloso ea Beam | 1.6 | 2.8 | 1.6 | |
| Protocol | XY2-100 | |||
| Matla a theko e phahameng haholo | 250W | 10W | 25W | |
| Sebaka sa Tsamaiso ea Ketsahalo | 7mm | 6mm | 3.5 limilimithara | 7mm |
| Mocheso oa ho sebetsa | 25±10℃ | |||
| Sebaka sa ho Tšoaea | 70*70,100*100,150*150,200*200,300*300 | |||
| Hona joale & Voltage | ± 15VDC, ≥3A;24V 3A | |||
Boemo ba Sehlahisoa
LINTLHA TSEO
LINTLHA TSEO
