China Femtosecond Laser Source 10W 30W 40W
China Femtosecond Laser e nang le Infrared bakeng sa Laser Cutting, Welding, Micro Processing...
Huaray Laser (Khamphani e tsetelitsoeng ea JCZ) e nts'etsapele le ho etsa letoto le tšepahalang la femtosecond ultrafast laser HR-Femto ea liindasteri tsa fiber femtosecond lasers.Li arotsoe ka lihlopha tsa HR-Femto-10 (10 μJ), HR-Femto-50 (50 μJ), le HR-Femto-50HE (80 μJ) letoto, tse netefalitsoeng, tse ka tšeptjoang haholo, 'me li ka sebelisoa 24/ 7.Laser pulse widths ea <350 fs kapa <350 fs to 5 ps e ka fetoha.Greenlight wavelengths e ka hlahisoa ka ho sebelisa jenereithara ea harmonic (SHG).
Litlhaloso
Letoto la HR-Femto-50 la li-laser tsa femtosecond tsa indasteri li netefalitsoe, li tšepahala haholo, 'me li etselitsoe ts'ebetso ea 24/7.Laser e ts'ehetsa matla a> 60 W ho 1035 nm wavelength,> 80 μJ matla a pulse a le mong, bophara bo feto-fetohang ba pulse ho tloha
Likarolo tsa mantlha:
- Ho fihla ho 60 W ka karolelano ea matla
- Mothapo o le mong oa matla a fihlang ho 80 μJ
- - 1 Hz - 1 MHz Pheta-pheta e Fetohang
- E tšehetsa mefuta e mengata ea Burst Mode
- E kenyelletsa khetho ea pulse bakeng sa karohano e batloang ke matla
- Moralo o thata, o tsoetseng pele oa indasteri e le 'ngoe
- Optional SHG module ho tšehetsa tlhahiso ea khanya e tala
Sebaka sa Kopo:
- Ho cheka le ho seha thepa e thata le e brittle
- Ho Welding ka Khalase
- Ho etsoa ha lintho tse nyenyane tsa tšepe
- Ts'ebetso ea thepa ea filimi e kopantsoeng
- Ts'ebetso e Ncha ea Lisebelisoa tsa Matla
- Ho sebetsana le ho sebetsana le li-polymers
- Ho etsa lisebelisoa tsa bongaka
- Ho ngola Fiber Optic Grating
| LIEKETSENG TS'OANELO | HR-Femto-IR-50-40 | HR-Femto-IR-80-60 | HR-Femto-GN-25-20 | HR-Femto-GN-30-24 |
| Bohareng ba Wavelength | 1035 nm | 1035 nm | 517nm | 517nm |
| Karolelano ea Matla | 40 W | 60 W | 20 W | 24 W |
| Matla a Pulse | 50 μJ @ 800 kHz | 80 μJ @ 750 kHz | 25 μJ @ 800 kHz | 30 μJ @750 kHz |
| Nako ea Pulse | ||||
| Phahamisa Matla | 200 μJ | 320 μJ | 100 μJ | 120 μJ |
| Matla a Hloahloa | > 140 MW | > 220 MW | > 70 MW | > 110 MW |
| Pheta-pheto | Thunya e le 'ngoe ho 1 MHz | Thunya e le 'ngoe ho 1 MHz | Thunya e le 'ngoe ho 1 MHz | Thunya e le 'ngoe ho 1 MHz |
| Boleng ba Beam | M2≤1.3 | M2≤1.3 | M2≤1.3 | M2≤1.3 |
| Phapang ea Beam | ||||
| Beam Circularity | ≥90% | ≥90% | ≥90% | ≥90% |
| Beam Diameter | 3 ±1 limilimithara, 1/e2 | 3 ±1 limilimithara, 1/e2 | 3 ±1 limilimithara, 1/e2 | 4 ±2 limilimithara, 1/e2 |
| Polarization State | Linear | Linear | Linear | Linear |
| Pulse Stability | <2% RMS | <2% RMS | <2% RMS | <2% RMS |
| Botsitso ba Matla | <2% RMS | <2% RMS | <2% RMS | <2% RMS |
| Mocheso oa Ts'ebetso | 10 ho isa ho 30 ° C | 10 ho isa ho 30 ° C | 10 ho isa ho 30 ° C | 10 ho isa ho 30 ° C |
HR-Femto-10 letoto la liindasteri tsa fiber femtosecond lasers li entsoe ka kopanyo ea optical le motlakase, ka ts'ebetso e tsitsitseng le e tšepahalang, 'me e ka netefatsoa hore e sebetsa lihora tse 24 ka letsatsi.E ts'ehetsa tlhahiso ea > 10 W ho 1035 nm wavelength le matla a pulse a le mong a> 10 μJ 'me e ka sebelisoa le mochine o atisang ka ntle ho finyella tlhahiso ea 517 nm wavelength.Letoto lena la lihlahisoa le ka sebelisoa eseng feela lipatlisisong tsa indasteri le tsa mahlale empa hape le lefapheng la biophotonics le meriana ea lifoto.
Likarolo tsa mantlha:
- Moralo o kopaneng oa leseli le motlakase
- E ts'ehetsa maqhubu a pheta-phetoang ho tloha ho 1 Hz ho isa ho 1 MHz
- E ts'ehetsa matla a mahareng le taolo ea matla a pulse
- Pulse bophara - E ts'ehetsa ts'ebetso ea konopo e le 'ngoe
- Sesebelisoa sa ho itšehla thajana se hahelletsoeng kahare
- Ts'ebetso ea ho fetoha ha wavelength (ho ikhethela)
Sebaka sa Kopo:
- Ho nepahala ha micromarking
- Phetoho ea lintho tse bonahalang
- ts'ebetso ea micronanometer tse peli tsa photon
- polokelo ea optical
- litšoantšo tsa microscopic
- opereishene ea mahlo
| LIEKETSENG TS'OANELO | HR-Femto-IR-10-10 | HR-Femto-GN-4-4 |
| Wavelength | 1035 nm | 517 nm |
| Karolelano ea Matla | 10 W | 4 W |
| Matla a Pulse | 10 μJ @ 1 MHz | 4 μJ @ 1 MHz |
| Nako ea Pulse | ||
| Matla a Hloahloa | > 25 MW | > 10 MW |
| Pheta-pheto | Shot e le 'ngoe ho 1 MHz | Shot e le 'ngoe ho 1 MHz |
| Boleng ba Beam | M2≤1.3 (Tlhaloso <1.2) | M2≤1.3 (Tlhaloso <1.2) |
| Phapang ea Beam | ||
| Beam Circularity | ≥90% | ≥90% |
| Beam Diameter | 3 ±1 limilimithara, 1/e2 | 3 ±1 limilimithara, 1/e2 |
| Polarization State | Linear | Linear |
| Pulse Stability | <2% RMS | <2% RMS |
| Botsitso ba Matla | <2% RMS | <2% RMS |
| Mocheso oa Ts'ebetso | 10 ho isa ho 30 ° C | 10 ho isa ho 30 ° C |
Letoto la HR-Femto-200 la lasers ea femtosecond ke li-lasers tsa femtosecond tse tsitsitseng le tse tšepahalang tse ntlafalitsoeng ke Huaray, 'me ke litholoana tsa Lenaneo la Naha la Lipatlisiso le Nts'etsopele.Laser e nka moralo o kopaneng oa optical le motlakase, o nang le bophara ba pulse e ka tlase ho 350 fs, matla a pulse a le mong a 200 μJ, le tšehetso ea Burst Mode.Lihlahisoa li ka sebelisoa haholo ts'ebetsong ea semiconductor wafer, li-ceramics le polymer processing, ts'ebetso ea daemane, ts'ebetso ea lisebelisoa tse ncha tsa matla, ho sebetsa ka thata ho sebetsa ka tšepe, ho sebetsa le ho phekola thepa ea polymer, le likarolo tse ling.
Likarolo tsa mantlha:
- Mothapo o le mong oa matla a fihlang ho 200 μJ
- Pulse bophara ka tlase ho 350 fs
- Ts'ehetso bakeng sa Mokhoa oa Burst
- Moralo o kopaneng oa optical le motlakase
- Ts'ebetso ea ho ama e le 'ngoe ntle le konopo ea tokiso
- Sesebelisoa sa ho itšehla thajana se hahiloeng kahare ho optical
- Sekhethi sa pulse se hahiloeng ka hare
Sebaka sa Kopo:
- Ts'ebetso ea Semiconductor Wafer
- Ceramics le Polymer Processing
- Ho sebetsa ha litaemane
- Ts'ebetso e Ncha ea Lisebelisoa tsa Matla
- Ho sebetsa ka thata ka tšepe
- Ho sebetsana le ho sebetsana le li-polymers
| LIEKETSENG TS'OANELO | HR-Femto-IR-200-35 |
| Wavelength | 1035 nm |
| Karolelano ea Matla | 35 W |
| Matla a Pulse | 200 μJ @ 175 kHz |
| Nako ea Pulse | |
| Matla a Hloahloa | > 570 MW |
| Pheta-pheto | Thunya e le 'ngoe ho 1 MHz |
| Boleng ba Beam | M2≤1.3 |
| Phapang ea Beam | |
| Beam Circularity | ≥85% |
| Beam Diameter | 4 ±1 limilimithara, 1/e2 |
| Polarization State | Linear |
| Pulse Stability | <2% RMS |
| Botsitso ba Matla | <2% RMS |
| Mocheso oa Ts'ebetso | 10 ho isa ho 30 ° C |
| Li-Comms tsa Kantle | RS-232, Ethernet, USB |
Boemo ba Sehlahisoa
