Mochini oa Thin/Thick Film Resistor Laser Trimming Machine - TS4210 Series China
Mochini oa ho Trimming Resistor o Tenyetsehang Bakeng sa Potoloho ea Filimi e Lesesaane le e Tenya
TS4210 series laser trimming machine e entsoe le ho ntlafatsoa ke SharpSpeed Precision(A 100% e tšoere k'hamphani e tlase ea JCZ)bakeng sa 'maraka o sebetsang oa ho fokotsa.E ka etsa mokhoa o nepahetseng oa ho fokotsa laser holim'a liparamente tse amehang tsa li-circuits tse fapaneng tsa lifilimi tse tšesaane/tse teteaneng.E loketse ho fokotsa laser ea li-sensor tsa khatello, li-sensor tsa hajoale, li-sensor tsa photoelectric, li-charger, li-attenuators le lihlahisoa tse ling.
Likarolo tse ka Sehloohong
◆ Thepa e ka lemoha phetoho e nepahetseng ea li-parameter tsa potoloho tse kopanetsoeng, tse kang ho hanyetsa, voltage, hona joale, potoloho, maqhubu, joalo-joalo;
◆ Mokhoa o ikemetseng oa ho lekanya mekhoa e mengata (ho fihlela ho li-channel 96), ho nepahala ho phahameng, lebelo le phahameng, le tsitsitseng le le ka tšeptjoang;e sebetsang ho mefuta e fapaneng ea thepa ea filimi e teteaneng;
◆ E ka kopanngoa le litlhaloso tse fapaneng tsa sehokelo sa boto ea probe, e lumellanang le mefuta eohle ea boto e tloaelehileng ea lipatlisiso;Sebopeho sa ho lekanya probe se fofang sea khoneha ho fihlela litlhoko tse khethehileng tsa tokiso;
◆ High precision X / Y module e nang le sebopeho sa sethala sa pneumatic clamping ho finyella litlhoko tsa mefuta e fapaneng ea lihlahisoa le sethala sa clamping se na le sekhahla se feto-fetohang sa ho potoloha le bophahamo;
◆E na le litokelo tse ikemetseng tsa thepa ea mahlale tsa software ea ho fokotsa, e nang le sebopeho se bonolo sa mosebedisi le ho sebetsa habonolo.'Me tsamaiso ea coaxial CCD bakeng sa ho ikamahanya ha othomathike e boetse e kopantsoe.
◆ Mosebetsi o bonolo le o bonolo oa ho iketsetsa mananeo ho finyella litlhoko tsa motho ka mong, ho boloka habonolo, ho hopola, ho fetola, e leng se ntlafalitseng haholo katleho ea tlhahiso ea bongata;
◆ Mefuta e fapa-fapaneng ea thipa ea ho hanyetsa e ka fetolehang: thipa e le 'ngoe, thipa ea L, holim'a metsi, U thipa, le mokhoa o sa tloaelehang oa matheba ho finyella litlhoko tse sa tšoaneng tsa tshebetso.
◆E ts'ehetsa ho kenya le ho romela kantle ho naha ea data ea ho fokotsa, e leng bonolo bakeng sa ts'ebetso ea tlhahiso le taolo ea taolo ea boleng;
◆ Sebopeho sa katoloso sa GPIB se bolokiloe, se ka kopanngoa le lisebelisoa tsa ho lekanya tse ka ntle bakeng sa mesebetsi e meng;
◆ Mochine oa ho kenya le oa ho theola o na le lisebelisoa, tse ntlafatsang haholo katleho ea tlhahiso ea bongata;
Setšoantšo sa Sehlahisoa
Litlhaloso
| Sistimi ea ho lekanya | |
| Trimming Range | 1.0 - 1.0MΩ (boikhethelo bo phahameng le bo tlase ba ho hanyetsa) |
| Ho Trimming Precision | ±0.3% |
| Ho lekanya ho Nepaha | Khanyetso e Tlase(＜50Ω): ±0.02%(±0.5%/R) Ho Khanyetso Hare: ±0.02% Ho Khanyetso ho Phahameng(＞50Ω): ±0.02%(±0.1%/M) |
| Mekhahlelo ea Optical | |
| Laser Wavelength | 1064nm (532nm & 355nm boikhethelo) |
| Sistimi ea ho hlahloba | Hlooho e phahameng ea ho nepahala le ho hlahloba lebelo. |
| Tšimo e Sebetsang | 100 * 100mm |
| Qeto e nepahetseng | 1.5um |
| Pheta Positioning Precision | 2.5um |
| Boholo ba Beam | 20-30um |
| Ba bang | |
| Lekana la Karete ea ho lekanya | Boholo ba 96 Pin |
| Software O/S | WIN7/10 |
| Phepelo ea motlakase | 110V/220V,50/60Hz |
| Khatello ea Khase | 0.4-0.6Mpa |
| Mocheso oa Ts'ebetso | 24±4℃ |
| Boholo ba Mochini | 1845*1420*1825mm |
