• Isoftware yoLawulo lokuMakisha ngeLaser
  • Laser Controller
  • Intloko yeLaser Galvo Scanner
  • IFayibha/UV/CO2 /Green/Picosecond/Femtosecond Laser
  • Laser Optics
  • Oomatshini beLaser OEM / OEM |Ukumakisha |Welding |Ukusika |Ukucoca |Ukucheba

INVISCAN China 3 Axis Galvo Scanner Nge VCM Motor

Inkcazelo emfutshane:


Iinkcukacha zeMveliso

Iithegi zeMveliso

Isantya esiphezulu se-3 Axis Galvo Skena Intloko eneVMC Motor yokuMakisha, ukusika, ukuwelda...

I-INVINSCAN Series 3D laser galvo scanner intloko ine-XYZ axis.I-Z-axis isebenza njenge-focus shifter, eya kutshintsha umgama wokusebenza phakathi kwe-lens ye-f-theta kunye nezinto ngokobude bento.Ngokusebenza kunye nomlawuli we-DLC2-M4-3D kunye nesoftware ye-EZCAD3, ukusetyenzwa kwelaser njengokumakisha kunokwenziwa ngokulula nangokufanelekileyo.

*Inqanaba eliphezulu: Isantya sokuskena> 10000mm / S
* Intle kakhulu: Ukuphindaphinda <2um
*Izinzile: Ubushushu bexesha elide lobushushu <5urad
*Ukufana: Indawo yempazamo yedayamitha ngaphakathi koluhlu lokusetyenzwa< 19%

Imifanekiso yeMveliso

Iinkcukacha

I-A1064-10 A355-14A 355-10A 1064-14A
Umbhobho wokuvula 10mm 14mm 10mm 14mm
Ubude bamaza 1030-1070nm 355nm
Isantya esiphezulu sokuMakisha 450cps/s 700cps/s 450cps/s 700cps/s
Ukuma kwesantya 7m/s 10m/s 7m/s 10m/s
Imposiso yokuJonga umkhondo 0.3ms 0.18ms 0.3ms 0.18ms
Ukuchaneka kokuMakishwa okuphindiweyo <2μrad
Ukuqhuba ixesha elide(>8h) <5 irad
I-engile yokuphambuka okusebenzayo ±20°
Beam Ukwandiswa Ratio 1.6 2.8 1.6
Umgaqo-nkqubo XY2-100
Max Amandla afikelelekayo 250W 10W 25W
Indawo yeNkqubo yezehlo 7mm 6mm 3.5mm 7mm
Ubushushu bokusebenza 25±10℃
Indawo yokumakisha 70*70,100*100,150*150,200*200,300*300
Okwangoku kunye neVoltage ±15VDC,≥3A;24V 3A

Imveliso Dimension

I-ININScan
I-ININScan

I-ININScan


  • Ngaphambili:
  • Okulandelayo: