China Femtosecond Laser Umthombo 10W 30W 40W
I-China Femtosecond Laser ene-infrared yokusika iLaser, iWelding, iMicro Processing...
I-Huaray Laser (Inkampani etyali-mali ye-JCZ) iphuhlisa kwaye ivelisa i-femtosecond ultrafast laser HR-Femto uthotho lwe-industrial-level fiber femtosecond lasers.Zihlelwe kwi-HR-Femto-10 (10 μJ), i-HR-Femto-50 (50 μJ), kunye ne-HR-Femto-50HE (80 μJ) series, eziqinisekisiweyo, ezithembekileyo kakhulu, kwaye zingasetyenziswa 24/ 7.I-Laser pulse widths <350 fs okanye <350 fs ukuya kwi-5 ps iyahlengahlengiswa.Ukukhanya kokukhanya okuluhlaza kunokukhutshwa ngokusebenzisa i-harmonic generator (SHG).
Iinkcukacha
Uluhlu lwe-HR-Femto-50 yee-laser ze-femtosecond lasers ziqinisekisiwe, zithembeke kakhulu, kwaye zenzelwe ukusebenza kwe-24/7.Ilaser ixhasa>60 W amandla ku-1035 nm wavelength,>80 μJ amandla epulse enye, ububanzi bepulse obuhlengahlengiswayo ukusuka
Iimpawu eziphambili:
- Ukuya kuthi ga kwi-60 W umndilili wamandla
-I-pulse yamandla enye ukuya kuthi ga kwi-80 μJ
- - 1 Hz - 1 MHz Adjustable Phinda Frequency
-Ixhasa imidibaniso ye-Burst Mode emininzi
- Ibandakanya umkhethi we-pulse wokwahlulwa kwe-pulse kwimfuno efunekayo
-Uyilo olumagingxigingxi, oluphuculweyo lwesiqwenga esinye
-Imodyuli ekhethiweyo yeSHG ukuxhasa ukuphuma kokukhanya okuluhlaza
Indawo yesicelo:
- Ukugrunjwa kunye nokusika izinto eziqinileyo kunye neziqhekezayo
- Ukuwelda kweglasi
- Ukwenziwa kwezinto ezincinci zentsimbi
-Ukulungiswa kwemathiriyeli yefilimu ehlanganisiweyo
-Ukwenziwa kweMathiriyeli yaMandla amatsha
- Ukulungiswa kunye nokuphathwa kweepholima
- Ukwenziwa kwezixhobo zonyango
-Fiber Optic Grating Ukubhala
| INGCACISO | HR-Femto-IR-50-40 | HR-Femto-IR-80-60 | I-HR-Femto-GN-25-20 | I-HR-Femto-GN-30-24 |
| Ubude obuphakathi | 1035 nm | 1035 nm | 517nm | 517nm |
| Amandla aphakathi | 40 W | 60 W | 20 W | 24 W |
| Pulse Energy | 50 μJ @ 800 kHz | 80 μJ @ 750 kHz | 25 μJ @ 800 kHz | 30 μJ @ 750 kHz |
| Ubude bePulse | ||||
| Gqama Amandla | 200 μJ | 320 μJ | 100 μJ | 120 μJ |
| Amandla aphezulu | > 140 MW | > 220 MW | > 70 MW | >110 MW |
| Ireyithi yokuphindaphinda | Isithonga esinye ukuya kwi-1 MHz | Isithonga esinye ukuya kwi-1 MHz | Isithonga esinye ukuya kwi-1 MHz | Isithonga esinye ukuya kwi-1 MHz |
| Umgangatho weBeam | M2≤1.3 | M2≤1.3 | M2≤1.3 | M2≤1.3 |
| Ukwahlukana kweBeam | ||||
| Isetyhula yeBeam | ≥90% | ≥90% | ≥90% | ≥90% |
| Ububanzi beBeam | 3 ±1 mm, 1/e2 | 3 ±1 mm, 1/e2 | 3 ±1 mm, 1/e2 | 4 ±2 mm, 1/e2 |
| Urhulumente wePolarization | Umgca | Umgca | Umgca | Umgca |
| Ukuzinza kwePulse | <2% RMS | <2% RMS | <2% RMS | <2% RMS |
| Uzinzo lwamandla | <2% RMS | <2% RMS | <2% RMS | <2% RMS |
| ITemp yokuSebenza | 10 ukuya kuma-30 °C | 10 ukuya kuma-30 °C | 10 ukuya kuma-30 °C | 10 ukuya kuma-30 °C |
I-HR-Femto-10 uchungechunge lwe-fiber fiber femtosecond lasers ziyilwe ngokudibanisa okubonakalayo kunye nombane, kunye nokusebenza okuzinzile nokuthembekileyo, kwaye kunokuqinisekiswa ukusebenza iiyure ezingama-24 ngosuku.Ixhasa imveliso ye> 10 W kwi-1035 nm wavelength kunye ne-pulse yamandla enye ye-> 10 μJ kwaye ingasetyenziselwa umphindaphindi wangaphandle ukuphumeza i-517 nm ye-wavelength output.Olu chungechunge lweemveliso alunakusetyenziswa kuphela kuphando lwezoshishino kunye nesayensi kodwa nakwintsimi ye-biophotonics kunye neyeza leefoto.
Iimpawu eziphambili:
- Uyilo oludibeneyo lokukhanya kunye nombane
-Ixhasa ukuphindaphinda okuphindaphindiweyo ukusuka kwi-1 Hz ukuya kwi-1 MHz
- Ixhasa umndilili wamandla kunye nolawulo lwamandla e-pulse
- Ububanzi be-Pulse - Ixhasa ukusebenza kweqhosha elinye
-Isixhobo esakhelwe-ngaphakathi sokwahlukanisa
-Inkxaso yokutshintsha kobude bomsebenzi (ukhetho)
Indawo yesicelo:
- Ukuchaneka kokumakisha kancinci
- Ukuguqulwa kwezinto eziphathekayo
- i-photon-micro-nanometer processing processing
- ukugcinwa kwamehlo
-iimaging microscopic
- utyando lwamehlo
| INGCACISO | HR-Femto-IR-10-10 | I-HR-Femto-GN-4-4 |
| Ubude bamaza | 1035 nm | 517 nm |
| Amandla aphakathi | 10 W | 4 W |
| Pulse Energy | 10 μJ @ 1 MHz | 4 μJ @ 1 MHz |
| Ubude bePulse | ||
| Amandla aphezulu | > 25 MW | >10 MW |
| Ireyithi yokuphindaphinda | Shot enye ukuya 1 MHz | Shot enye ukuya 1 MHz |
| Umgangatho weBeam | I-M2≤1.3 (Eqhelekileyo <1.2) | I-M2≤1.3 (Eqhelekileyo <1.2) |
| Ukwahlukana kweBeam | ||
| Isetyhula yeBeam | ≥90% | ≥90% |
| Ububanzi beBeam | 3 ±1 mm, 1/e2 | 3 ±1 mm, 1/e2 |
| Urhulumente wePolarization | Umgca | Umgca |
| Ukuzinza kwePulse | <2% RMS | <2% RMS |
| Uzinzo lwamandla | <2% RMS | <2% RMS |
| ITemp yokuSebenza | 10 ukuya kuma-30 °C | 10 ukuya kuma-30 °C |
Uluhlu lwe-HR-Femto-200 yee-laser ze-femtosecond zizinzile kwaye zithembekile ii-laser ze-femtosecond eziphuhliswe ngu-Huaray, kwaye zisisiphumo seNkqubo yoPhando oluPhambili kunye noPhuhliso lweSizwe.I-laser ithatha idizayini edibeneyo ye-optical kunye nombane, kunye nobubanzi be-pulse obungaphantsi kwe-350 fs, amandla e-pulse enye ye-200 μJ, kunye nenkxaso ye-Burst Mode.Iimveliso zinokusetyenziswa ngokubanzi kwi-semiconductor wafer processing, i-ceramics kunye ne-polymer processing, ukusetyenzwa kwedayimani, ukusetyenzwa kwemathiriyeli yamandla amatsha, ukusetyenzwa kanzima kwesinyithi, ukusetyenzwa kwezinto zepolymer kunye nonyango, kunye nezinye iinkalo.
Iimpawu eziphambili:
-I-pulse yamandla enye ukuya kuthi ga kwi-200 μJ
- Pulse ububanzi ngaphantsi kwe 350 fs
-Inkxaso yeNdlela yokuQhutywa
- Uyilo oludibeneyo lwe-optical kunye nombane
-Umsebenzi wokuchukumisa omnye ngaphandle kweqhosha lohlengahlengiso
-Isixhobo esakhelwe-ngaphakathi se-optical solation
-Umkhethi we-pulse eyakhelwe-ngaphakathi
Indawo yesicelo:
-I-Semiconductor Wafer Processing
-IiCeramics kunye nePolymer Processing
- Ukulungiswa kwedayimani
-Ukwenziwa kweMathiriyeli yaMandla amatsha
- Ukusebenza kwesinyithi kunzima
- Ukulungiswa kunye nokuphathwa kweepholima
| INGCACISO | HR-Femto-IR-200-35 |
| Ubude bamaza | 1035 nm |
| Amandla aphakathi | 35 W |
| Pulse Energy | 200 μJ @ 175 kHz |
| Ubude bePulse | |
| Amandla aphezulu | > 570 MW |
| Ireyithi yokuphindaphinda | Isithonga esinye ukuya kwi-1 MHz |
| Umgangatho weBeam | M2≤1.3 |
| Ukwahlukana kweBeam | |
| Isetyhula yeBeam | ≥85% |
| Ububanzi beBeam | 4 ±1 mm, 1/e2 |
| Urhulumente wePolarization | Umgca |
| Ukuzinza kwePulse | <2% RMS |
| Uzinzo lwamandla | <2% RMS |
| ITemp yokuSebenza | 10 ukuya kuma-30 °C |
| IiComms zangaphandle | RS-232, Ethernet, USB |
Imveliso Dimension
