English
  • Isoftware yoLawulo lokuMakisha ngeLaser
  • Laser Controller
  • Intloko yeLaser Galvo Scanner
  • IFayibha/UV/CO2 /Green/Picosecond/Femtosecond Laser
  • Laser Optics
  • Oomatshini beLaser OEM / OEM |Ukumakisha |Welding |Ukusika |Ukucoca |Ukucheba

UyiPhucula njani i-EZCAD2 ukuya kwi-EZCAD3

I-EZCA2-UPGRADE1

I-EZCAD3 sisizukulwana esitsha senkqubo yokumakisha yelaser, enenkqubo enkqenkqeza phambili kwihlabathi kunye nobuchwepheshe bolawulo lwelaser.Uhlaziyo lwe-EZCAD2 lumiswe ngokusemthethweni kwi-2019. Eli nqaku liza kukukhokela ukuba uphucule umlawuli wakho wangoku kunye nesofthiwe kwinguqulo yakamuva kunye neendlela zamva nje.

Ngowuphi umsebenzi owongezelelweyo?

1. I-Pre-Wiring (i-JCZ iya kwenza)

Iphinikhodi yomlawuli we-LMC (Isebenza ne-EZCAD2) yahlukile kumlawuli we-DLC (Isebenza ne-EZCAD3).I-JCZ iya kwenza ukuba ibonelele abanye abaguquli ukuqinisekisa ukuba akukho cingo olongezelelweyo olufunekayo.

2.Ubonelelo lwaMandla olwahlukileyo (i-JCZ iya kwenza)

Umlawuli we-LMC (usebenza ne-EZCAD2) usebenzisa i-DC 5V 2A amandla.Kodwa umlawuli we-DLC (usebenza ne-EZCAD3) ufuna i-DC 12V 2A amandla.

I-JCZ iya kunika enye iMini DC 12V 2A amandla njengomfanekiso ongezantsi.

Ubonelelo lwaMandla kuMlawuli weLaser

3. Ulungelelwaniso kwakhona. (Ngezifundo zevidiyo)

I-EZCAD3 isebenzisa indlela yolungelelwaniso echane ngakumbi ukunciphisa ukugqwetheka kunye nokuphucula ukuchaneka.

Siza kubonelela ngezifundo zevidiyo zokukukhokela ukuba wenze ulungelelwaniso oluchanekileyo oluphezulu, oluthatha malunga nemizuzu eli-15.Nceda ulungise irula kwangaphambili.

4. 64-bits O/S Kuphela

I-EZCAD3 ine-64-bit kernel, ephucule kakhulu ukusebenza kwesoftware.Inkqubo yokusebenza ye-64-bit iyafuneka kwaye i-WIN10 enamasuntswana angama-64 iyacetyiswa.

5. Ukusetwa kwakhona kweSoftware (JCZ iya kwenza)

Ubume be-EZCAD3 bohluke kancinane kwi-EZCAD2.I-JCZ izakwenza useto lwangaphambili ngokwesetingi yakho yangoku.

6. Ufakelo olwahlukileyo.

Ubungakanani bomlawuli we-DLC (usebenza kunye ne-EZCAD3) uhluke kumlawuli we-LMC (usebenza ne-EZCAD2), oku kuthetha ukuba ukuba iikhabhinethi zakho zoomatshini azinayo indawo eyaneleyo, kufuneka uyifake ngaphandle kwekhabhinethi.

Iintlobo ezintathu ezikhethiweyo zomlawuli ziyafumaneka ngezantsi.

A: Naked double-layer controller.Unokufaka ngaphakathi kumatshini wakho ukuba kukho indawo eyaneleyo okanye uyifake ngaphandle kwekhabhinethi ngaphandle kokukhusela.

ikhadi

B: Umlawuli we-DLC onamaqweqwe.Ukuba ikhabhinethi yakho yomatshini ayinayo indawo eyaneleyo, inokufakwa ngaphandle komatshini ngokukhuselekileyo.

96206beb

Umlawuli we-C. DLC kunye nePC yoshishino edibeneyo.Lungiselela nje imonitha enye kwaye uyibeke ngaphandle kwekhabhinethi yomatshini.

QQ截图20200815065620

Ixesha lokuposa: Aug-14-2020