English
  • Isoftware yoLawulo lokuMakisha ngeLaser
  • Laser Controller
  • Intloko yeLaser Galvo Scanner
  • IFayibha/UV/CO2 /Green/Picosecond/Femtosecond Laser
  • Laser Optics
  • Oomatshini beLaser OEM / OEM |Ukumakisha |Welding |Ukusika |Ukucoca |Ukucheba

3D Laser Galvo Scan Intloko China kunye XYZ Axis – GO3D-T

3D Laser Galvo Scan Intloko China kunye XYZ Axis – GO3D-T Umfanekiso Featured
  • 3D Laser Galvo Scan Intloko China kunye XYZ Axis – GO3D-T
  • 3D Laser Galvo Scan Intloko China kunye XYZ Axis – GO3D-T
  • 3D Laser Galvo Scan Intloko China kunye XYZ Axis – GO3D-T
  • 3D Laser Galvo Scan Intloko China kunye XYZ Axis – GO3D-T
  • 3D Laser Galvo Scan Intloko China kunye XYZ Axis – GO3D-T

Inkcazelo emfutshane:


  • Ixabiso lento:Kuyathethwana
  • Imigaqo yeNtlawulo:I-100% kwi-Advance
  • Uhlobo lokuhlawula:T/T, Paypal, Credit Card...
  • Ilizwe lemveli:eTshayina

    • Iinkcukacha zeMveliso

    Iithegi zeMveliso

    GO3D-T 3 Axis XYZ Dynamic Focusing Laser Galvo Scanner Head for Laser Marking and other Applications

    I-GO3-T Series 3D laser galvo scanner intloko ine-XYZ axis.I-Z-axis isebenza njenge-focus shifter, eya kutshintsha umgama wokusebenza phakathi kwe-lens ye-f-theta kunye nezinto ngokobude bento.Ngokusebenza kunye nomlawuli we-DLC2-M4-3D kunye nesoftware ye-EZCAD3, ukusetyenzwa kwelaser njengokumakisha kunokwenziwa ngokulula nangokufanelekileyo.

    Imifanekiso yeMveliso

    Ii-FAQs

    Yintoni umahluko phakathi kwe-3D galvo kunye ne-2D galvo?

    Usetyenziso oluqhelekileyo lweskena se3D
    Ukumakishwa komphezulu, ukukhululeka, ukucocwa, ukuthungwa ngundo, unyango olungaphezulu.

    Usetyenziso oluqhelekileyo lweskena se-2D

    Ukumakishwa, ukusetyenzwa kwenqwelomoya kwi-Intanethi, ukwenziwa kokongeza

    Iinkcukacha

    Umzekelo: GO3D-T Series
    Umgaqo-nkqubo XY2-100
    Beam Ukwandiswa factor 2.0X 1.67X 1.85X
    XY Input Aperture 10mm 12mm 10mm 12mm 10mm 12mm
    Imbobo yokufaka 5.00mm 6.00mm 5.98mm 7.18mm 5.40mm 6.48mm
    Ubude bamaza I-GO3-T-355 I-GO3D-T-532/1064 I-GO3D-T-10600
    Umgaqo-nkqubo XY2-100
    Isantya sokumakisha 6000mm/s
    Ukuma kwesantya 12m/s 10m/s 12m/s 10m/s 12m/s 10m/s 12m/s 10m/s
    Indawo yokumakisha 150*150mm ±35mm nge F=254 lens
    Ixabiso elikhulu lika-Z linokuphunyezwa nge-F-theta enkulu.
    Ukunikezwa Amandla 15VDC 3A
    Indawo yokumakisha 150*150*±30mm
    ixabiso elinzulu lika-Z linokufikelelwa ngokusebenzisa i-lens enkulu ye-F-theta.
    Ukusebenza okunamandla
    Ixesha lempazamo yokulandela umkhondo 0.22ms 0.36ms 0.22ms 0.36ms 0.22ms 0.36ms 0.22ms 0.36ms
    Ukuphindaphinda ＜22urad ＜22urad ＜22urad ＜22urad ＜22urad ＜22urad ＜22urad ＜22urad
    Fumana ukukhukuliseka 80ppm/K 80ppm/K 80ppm/K 80ppm/K 80ppm/K 80ppm/K 80ppm/K 80ppm/K
    I-offset drift 30urad/K 30urad/K 30urad/K 30urad/K 30urad/K 30urad/K 30urad/K 30urad/K
    I-1% yesikali esipheleleyo 0.30ms 0.40ms 0.30ms 0.40ms 0.30ms 0.40ms 0.30ms 0.40ms
    I-10% yesikali esipheleleyo 0.80ms 1.20ms 0.80ms 1.20ms 0.80ms 1.20ms 0.80ms 1.20ms
    Non-Linearity ＜0.9mrad ＜0.9mrad ＜0.9mrad ＜0.9mrad ＜0.9mrad ＜0.9mrad ＜0.9mrad ＜0.9mrad
    Ukuhamba kwexesha elide ngaphezu kweeyure ezi-8 ＜0.3mrad ＜0.3mrad ＜0.3mrad ＜0.3mrad ＜0.3mrad ＜0.3mrad ＜0.3mrad ＜0.3mrad
    Ukusebenza okubonakalayo
    Ukuphambuka okuqhelekileyo ±0.39rad ±0.39rad ±0.39rad ±0.39rad ±0.39rad ±0.39rad ±0.39rad ±0.39rad
    Fumana impazamo ＜5mrad ＜5mrad ＜5mrad ＜5mrad ＜5mrad ＜5mrad ＜5mrad ＜5mrad
    Zero Offset ＜5mrad ＜5mrad ＜5mrad ＜5mrad ＜5mrad ＜5mrad ＜5mrad ＜5mrad
    Ubushushu bokusebenza 10-40℃ 10-40℃ 10-40℃ 10-40℃ 10-40℃ 10-40℃ 10-40℃ 10-40℃
    Ukugcina Ubushushu -20-60℃ -20-60℃ -20-60℃ -20-60℃ -20-60℃ -20-60℃ -20-60℃ -20-60℃

    Imveliso Dimension

    Umzobo we-2D
    Umzobo we-3D
    Umzobo we-2D

    I-3D SCANHEAD

    Umzobo we-3D

    Ividiyo ye-3D Laser Galvo

  • Ngaphambili:
  • Okulandelayo:

    • Iindidi zeemveliso