• I-Laser Marking Control Software
  • Isilawuli se-Laser
  • Ikhanda le-Laser Galvo Scanner
  • I-Fiber/UV/CO2 /Green/Picosecond/Femtosecond Laser
  • I-Laser Optics
  • Imishini ye-OEM/OEM Laser |Ukumaka |Welding |Ukusika |Ukuhlanza |Ukunquma

I-Potentiometer/Position Sensor Laser Trimming Machine China – TS4410 Series

Incazelo emfushane:


Imininingwane Yomkhiqizo

Omaka bomkhiqizo

I-Potentiometer / I-Position Sensor Laser Trimmer Machine - TS4410 High Precision

Umshini wokunquma we-laser we-TS4410 we-potentiometer/displacement sensor wenzelwe i-resistive potentiometer kanye nemakethe yezinzwa zomugqa.Umshini wokunquma nge-laser onembile awukwazi nje kuphela ukunquma umugqa we-resistor, kodwa futhi ukusika ukumelana okuphelele kwesiphikisa ngesikhathi esifanayo.Lo mshini usetshenziswa kakhulu ukunquma nge-laser yazo zonke izinhlobo zama-potentiometer anembile (ipulasitiki/i-ceramic), izinzwa zokugudluza, neminye imikhiqizo.

Izici Eziyinhloko

◆Isistimu ye-software yokunquma ye-Trim Linear ethuthukisiwe, enobuchwepheshe benkampani bokunquma i-laser obunelungelo lobunikazi obuyingqayizivele, obusebenza ngamandla futhi obulula ukusebenza, noma yikuphi ukuphungula kwe-angle fixed point kanye nokusebenza kokusikwa okwenziwa ngesandla okunokwenzeka ukuze kufezeke indlela yokunquma evumelana nezimo nezishintshayo kanye nezidingo zohlelo ezidingweni zamakhasimende.I-trimmer inohlelo oluningi lokulinganisa, olufana nokulinganisa imvume, umsebenzi wokulinganisa ukulinganisa, njll., ukuhlangabezana nenkomba yezobuchwepheshe ngesikhathi sokukhiqizwa kwe-potentiometer.
◆Sisebenzisa ucwaningo lwethu oluzimele nokuthuthukiswa kwesistimu yokulawula ukunemba okuphezulu nesofthiwe yokusebenza, enomsebenzi onamandla wokunwetshwa.Singahlangabezana nezidingo ezikhethekile zekhasimende ezihlukahlukene, njenge:
>I-Symmetry retouching: I-Symmetry resistance retouching ingenziwa kunoma iyiphi i-engeli njengendawo yokuqala emaphakathi, ngokunemba okuncane kokulinganisa kwe-engeli ingu-2';
>Ukusikwa okuphikisayo kwamajika ethagethi ngokunganaki: ukubhala noma yimuphi umsebenzi kunoma yiluphi uhla lwama-engeli nokuqinisekisa ukuguquka okushelelayo phakathi kwamasegimenti emigqa ehlukene.
◆Isistimu yevidiyo ye-coaxial eklanywe ngokuzimela futhi ethuthukisiwe enekhamera yezimboni enesinqumo esiphezulu ingafinyelela ukulungiswa kokuhleleka okuzenzakalelayo, ukunciphisa iphutha lokuqondanisa komuntu, nokuthuthukisa ukusebenza kahle kokukhiqiza.

Izithombe Zomkhiqizo

Imininingwane

Imodeli I-TS4410D-L1000 I-TS4410F-L300 I-TS4410F-C50
Icubungula Imikhiqizo I-Linear Displacement Sensor I-Potentiometer/I-Circular Displacement Sensor
Icubungula usayizi L=25~1000 L=20~300 Φ=10-70
Uhlu oluzimele 25: ≤±0.2%
50-100: ≤±0.1%
125-1000: ≤±0.05%
(mm)
20: ≤±0.25%
50-100: ≤±0.2%
100-300: ≤±0.1%
(mm)
10-25: ≤±0.15%
25-70: ≤±0.1%
(mm)
Ukunemba kokunquma okuqondisiwe ±0.2%
Uhlelo Lokulinganisa Ibanga lokulinganisa: 100Ω-500KΩ
Ukunemba Kokulinganisa: Ukunquma Okumaphakathi: 0.02% Ukunquma Okuphezulu(>160K): 0.04%
Isofthiwe ye-O/S WIN7/10
Ukunikezwa kwamandla kagesi 110V/220V 50HZ/60HZ
Ingcindezi Yegesi 0.4-0.6Mpa
Operation Temperature 24±4℃
Ubukhulu 1182*902*1510mm
Qaphela: Umugqa ozimele ungathonywa kancane yizinto kanye nokulandelana kokuqala.Ipharamitha engenhla ayikwazi ukusetshenziswa njengezinga lokwamukela okokusebenza.

Imanuwali Yomkhiqizo

I-Laser Trimming Machine
I-Laser Trimming Software
I-Laser Trimming Measuring System
I-Laser Trimming Machine
I-Laser Trimming Software
I-Laser Trimming Measuring System

  • Okwedlule:
  • Olandelayo: