• Laser Marking Software
  • Mai Kula da Laser
  • Laser Galvo Scanner Head
  • Fiber/UV/CO2/Green/Picosecond/Laser na Femtosecond
  • Laser Optics
  • OEM/OEM Laser Machines |Alama |Walda |Yanke |Tsaftace |Gyara

EZCAD2 Koyarwar Bidiyo Manual Zazzage Kyauta

.

EZCAD2 jagora da koyaswar bidiyo suna samuwa akan wannan fitowar shafin ko kuma mai haɓaka software na EZCAD, Beijing JCZ Technology Co., Ltd.

EZCAD2 Manual Software

Don littafin jagorar hukuma, tuntuɓi Ƙungiyar Ƙasa ta JCZ tare da waɗannan bayanan da ke ƙasa don hanzarta ci gaban.

1. Hoton cikakken injin laser ku.
2. Hoton damai kula da lasergami da bayyanannen lambar serial da sunan ƙira.
3. Hoton daLaser galvo scannerkai tare da injin ku gami da alama da samfuri.
4. Hoton datushen lasertare da injin ku gami da alama da samfuri.
5. Da fatan za a bayyana idan kuna amfani da ko kera na'urorin Laser.

Lura: Idan kai mai amfani ne na ƙarshe, JCZ ƙila ba za ta iya ba da tallafi ba saboda rashin isassun ƙarfin goyan bayan fasaha.Ana ba da shawarar sosai don siyan aKunshin tallafi na watanni 3.

Koyarwar Software na EZCAD2 - Daga JefferyJ

Rashin yarda:
Youtuber Jeffery J, gogaggen mai amfani da EZCAD an raba shi kuma ya ba da izini duk koyaswar bidiyo akan shafin.
Duk bidiyon koyawa ba a tabbatar da su a hukumance ta hanyar JCZ ba, don haka JCZ ba zai zama abin dogaro ga kowane diyya da sauran haƙƙin doka ba don kowace asarar kai tsaye ko kaikaice da aka yi muku ko haifar da wani ɓangare na uku.

Koyarwar Bidiyo: Yadda ake Shigo da bayanan Excel zuwa EZCAD2?
Koyarwar Bidiyo: Yadda ake amfani da aikin PowerRuler a cikin EZCAD2?- Kashi na 1
Koyarwar Bidiyo: Yadda ake amfani da aikin PowerRuler a cikin EZCAD2?- Kashi na 2
Koyarwar Bidiyo: Yadda ake amfani da alamar manyan fayiloli da I/O suka jawo
Koyarwar Bidiyo: Yadda ake yiwa lambobi alama?
Koyarwar Bidiyo: Yadda ake amfani da aikin wobble?
Koyarwar Bidiyo: Yadda ake saita tsayin rubutu?
Koyarwar Bidiyo: Yadda ake saita mita don Laser fiber?
Koyarwar Bidiyo: Yadda ake saita lokacin Laser
Koyarwar Bidiyo: Yadda ake saita sigogin ƙyanƙyashe?
Koyarwar Bidiyo: Yadda za a daidaita matsayin samfoti ja?

Tips Alamar Laser tare da EZCAD2 - Daga JefferyJ

Tukwici Alamar EZCAD: Yadda za a yanke ƙarfe tare da Laser fiber 20W?

EZCAD Marking Tips: Yadda ake yin PCB tare da Laser fiber?


Lokacin aikawa: Dec-29-2019