China Factory for Galvo Co2 Laser Marking Machine - 3D Dynamic Focusing Laser Galvo Scanner Head | Without F-theta – JCZ
China Factory for Galvo Co2 Laser Marking Machine - 3D Dynamic Focusing Laser Galvo Scanner Head | Without F-theta – JCZ Detail:
3 Axis X Y Z Laser Galvo Scanning Head without F-theta Lens for Large Field 2D and 3D surface marking, cutting…
The 3D dynamic focusing laser galvo is applied to laser cutting, laser scribing, welding, drilling, additive manufacturing, mould texture, relief engraving, auto-hub material-removing….
Available Laser Resource: 355, 532,1064,10640nm etc.
Product Picture
Specification
20 Series
30 Series
50 Series
20 Series
| 20 Series | ||||||
| XY Specifications | ||||||
| Aperture | 20mm | |||||
| Beam displacement | 26.5mm | |||||
| Tracking error time | 360us | |||||
| Offset drift | 30urad/K | |||||
| Gain drift | 50ppm/K | |||||
| Step Response Time | ||||||
| 1% of full scale | - | |||||
| 10% of full scale | - | |||||
| Marking speed | 1m/s | |||||
| Positioning speed | 6m/s | |||||
| Writing Speed |
||||||
| Good quality | 320cps | |||||
| High quality | 210cps | |||||
| Repeatability | <15urad | |||||
| Drift over 8 hours | <0.1mrad | |||||
| After 30min Warm-Up and With Water Cooling | ||||||
| Typical scan angle | 40 degrees | |||||
| Interface | XY2-100 | |||||
| Operating temperature | 25±10℃ | |||||
| Power requirements | ±15VDC,150W | |||||
| Driver mode | Digital | |||||
| Resolution | 16Bit | |||||
| Max laser power | 1000w | |||||
| Z Specifications | ||||||
| Maximum lens travel | ±1.5mm | |||||
| Tracking error time | 1ms | |||||
| Typical travel speed | 140mm/s | |||||
| Repeatability | 1um | |||||
| Long-term drift | 6um | |||||
| General Specifications | ||||||
| Aperture | 9mm | |||||
| Power requirements | ±15VDC,Max 10A | |||||
| Operating temperature | 25±10℃ | |||||
| Typical scan angle | 40 degrees | |||||
| Interface | XY2-100 | |||||
| Working Filed & Spot Diameter | ||||||
| Spot diameter(um) | Working distance(mm) | Resolution(um) | ||||
| Working dimension(mm) | CO2 | |||||
| 200×200 | 214 | 228 | 3 | |||
| 400×400 | 402 | 502 | 6 | |||
| 600×600 | 589 | 777 | 9 | |||
| 800×800 | 683 | 915 | 12 | |||
| 1000×1000 | - | - | 15 | |||
| 1200×1200 | - | - | 18 | |||
| 1400×1400 | - | - | 21 | |||
| Working dimension(mm) | YAG | |||||
| 200×200 | 20 | 228 | 3 | |||
| 400×400 | 39 | 502 | 6 | |||
| 600×600 | 59 | 777 | 9 | |||
| 800×800 | - | - | 12 | |||
| 1000×1000 | - | - | 15 | |||
| 1200×1200 | - | - | 18 | |||
| 1400×1400 | - | - | 21 | |||
30 Series
| 30 Series | ||||||
| XY Specifications | ||||||
| Aperture | 30mm | |||||
| Beam displacement | 36.5mm | |||||
| Tracking error time | 550us | |||||
| Offset drift | 30urad/K | |||||
| Gain drift | 50ppm/K | |||||
| Step Response Time | ||||||
| 1% of full scale | - | |||||
| 10% of full scale | - | |||||
| Marking speed | 0.7m/s | |||||
| Positioning speed | 3m/s | |||||
| Writing Speed | ||||||
| Good quality | 220cps | |||||
| High quality | 150cps | |||||
| Repeatability | <15urad | |||||
| Drift over 8 hours | <0.1mrad | |||||
| After 30min Warm-Up and With Water Cooling | ||||||
| Typical scan angle | 40 degrees | |||||
| Interface | xY2-100 Enhanced | |||||
| Operating temperature | 25±10℃ | |||||
| Power requirements | ±15VDC,150W | |||||
| Driver mode | Digital | |||||
| Resolution | 16Bit | |||||
| Max laser power | 2500w | |||||
| Z Specifications | ||||||
| Maximum lens travel | ±1.5mm | |||||
| Tracking error time | 1ms | |||||
| Typical travel speed | 140mm/s | |||||
| Repeatability | 1um | |||||
| Long-term drift | 6um | |||||
| General Specifications | ||||||
| Aperture | 9mm | |||||
| Power requiremerns | ±15VDC,Max 10A | |||||
| Operating temperature | 25±10℃ | |||||
| Typical scan angle | 40 dgerees | |||||
| Interface | XY2-100 | |||||
| Working Filed & Spot Diameter | ||||||
| Spot diameter(um) | Working distance(mm) | Resolution(um) | ||||
| Working dimension(mm) | CO2 | |||||
| 200×200 | - | - | 3 | |||
| 400×400 | 247 | 502 | 6 | |||
| 600×600 | 367 | 777 | 9 | |||
| 800×800 | 428 | 915 | 12 | |||
| 1000×1000 | 607 | 1327 | 15 | |||
| 1200×1200 | - | - | 18 | |||
| 1400×1400 | - | - | 21 | |||
| Working dimension(mm) | YAG | |||||
| 200×200 | - | - | 3 | |||
| 400×400 | 26 | 502 | 6 | |||
| 600×600 | 38 | 777 | 9 | |||
| 800×800 | 45 | 915 | 12 | |||
| 1000×1000 | - | - | 15 | |||
| 1200×1200 | - | - | 18 | |||
| 1400×1400 | - | - | 21 | |||
50 Series
| 50 Series | ||||||
| XY Specifications | ||||||
| Aperture | 50mm | |||||
| Beam displacement | 58mm | |||||
| Tracking error time | 1.8ms | |||||
| Offset drift | 30urad/K | |||||
| Gain drift | 50ppm/K | |||||
| Step Response Time | ||||||
| 1% of full scale | - | |||||
| 10% of full scale | - | |||||
| Marking speed | 0.7m/s | |||||
| Positioning speed | 1.2m/s | |||||
| Writing Speed | ||||||
| Good quality | - | |||||
| High quality | - | |||||
| Repeatability | <15urad | |||||
| Drift over 8 hours | <0.1mrad | |||||
| After 30min Warm-Up and With Water Cooling | ||||||
| Typical scan angle | 40 degrees | |||||
| Interface | xY2-100 Enhanced | |||||
| Operating temperature | 25±10℃ | |||||
| Power requirements | ±15VDC,150W | |||||
| Driver mode | Digital | |||||
| Resolution | 16Bit | |||||
| Max laser power | >2500W | |||||
| Z Specifications | ||||||
| Maximum lens travel | ±1.5mm | |||||
| Tracking error time | 1ms | |||||
| Typical travel speed | 140mm/s | |||||
| Repeatability | 1um | |||||
| Long-term drift | 6um | |||||
| General Specifications | ||||||
| Aperture | 16mm | |||||
| Power requirements | ±15VDC,Max 10A | |||||
| Operating temperature | 25±10℃ | |||||
| Typical scan angle | 40 degrees | |||||
| Interface | XY2-100 | |||||
| Working Filed & Spot Diameter | ||||||
| Spot diameter(um) | Working distance(mm) | Resolution(um) | ||||
| Working dimension(mm) | CO2 | |||||
| 200×200 | - | - | 3 | |||
| 400×400 | - | - | 6 | |||
| 600×600 | 225 | 737 | 9 | |||
| 800×800 | 295 | 1012 | 12 | |||
| 1000×1000 | 367 | 1287 | 15 | |||
| 1200×1200 | 431 | 1561 | 18 | |||
| 1400×1400 | 498 | 1836 | 21 | |||
| Working dimension(mm) | YAG | |||||
| 200×200 | - | - | 3 | |||
| 400×400 | - | - | 6 | |||
| 600×600 | 23 | 737 | 9 | |||
| 800×800 | 30 | 1012 | 12 | |||
| 1000×1000 | 38 | 1287 | 15 | |||
| 1200×1200 | 45 | 1561 | 18 | |||
| 1400×1400 | 53 | 1836 | 21 | |||
Product detail pictures:
Related Product Guide:
With our excellent management, strong technical capability and strict quality control system, we continue to provide our clients with reliable quality, reasonable prices and excellent services. We aim at becoming one of your most reliable partners and earning your satisfaction for China Factory for Galvo Co2 Laser Marking Machine - 3D Dynamic Focusing Laser Galvo Scanner Head | Without F-theta – JCZ , The product will supply to all over the world, such as: Uzbekistan, Chicago, Turkey, With a fully integrated operation system, our company has won a good fame for our high quality goods, reasonable prices and good services. Meanwhile, we have established a strict quality management system conducted in material incoming, processing and delivery. Abiding by the principle of Credit first and customer supremacy, we sincerely welcome clients from home and abroad to cooperate with us and advance together to create a brilliant future.
By Kristin from Iraq - 2017.12.02 14:11
The sales person is professional and responsible, warm and polite, we had a pleasant conversation and no language barriers on communication.
By Amber from Lithuania - 2017.06.19 13:51
