Chinese Professional Galvo Scanner Motor - 3D Dynamic Focusing Laser Galvo Scanner Head | Without F-theta – JCZ
Chinese Professional Galvo Scanner Motor - 3D Dynamic Focusing Laser Galvo Scanner Head | Without F-theta – JCZ Detail:
3 Axis X Y Z Laser Galvo Scanning Head without F-theta Lens for Large Field 2D and 3D surface marking, cutting…
The 3D dynamic focusing laser galvo is applied to laser cutting, laser scribing, welding, drilling, additive manufacturing, mould texture, relief engraving, auto-hub material-removing….
Available Laser Resource: 355, 532,1064,10640nm etc.
Product Picture
Specification
20 Series
30 Series
50 Series
20 Series
| 20 Series | ||||||
| XY Specifications | ||||||
| Aperture | 20mm | |||||
| Beam displacement | 26.5mm | |||||
| Tracking error time | 360us | |||||
| Offset drift | 30urad/K | |||||
| Gain drift | 50ppm/K | |||||
| Step Response Time | ||||||
| 1% of full scale | - | |||||
| 10% of full scale | - | |||||
| Marking speed | 1m/s | |||||
| Positioning speed | 6m/s | |||||
| Writing Speed |
||||||
| Good quality | 320cps | |||||
| High quality | 210cps | |||||
| Repeatability | <15urad | |||||
| Drift over 8 hours | <0.1mrad | |||||
| After 30min Warm-Up and With Water Cooling | ||||||
| Typical scan angle | 40 degrees | |||||
| Interface | XY2-100 | |||||
| Operating temperature | 25±10℃ | |||||
| Power requirements | ±15VDC,150W | |||||
| Driver mode | Digital | |||||
| Resolution | 16Bit | |||||
| Max laser power | 1000w | |||||
| Z Specifications | ||||||
| Maximum lens travel | ±1.5mm | |||||
| Tracking error time | 1ms | |||||
| Typical travel speed | 140mm/s | |||||
| Repeatability | 1um | |||||
| Long-term drift | 6um | |||||
| General Specifications | ||||||
| Aperture | 9mm | |||||
| Power requirements | ±15VDC,Max 10A | |||||
| Operating temperature | 25±10℃ | |||||
| Typical scan angle | 40 degrees | |||||
| Interface | XY2-100 | |||||
| Working Filed & Spot Diameter | ||||||
| Spot diameter(um) | Working distance(mm) | Resolution(um) | ||||
| Working dimension(mm) | CO2 | |||||
| 200×200 | 214 | 228 | 3 | |||
| 400×400 | 402 | 502 | 6 | |||
| 600×600 | 589 | 777 | 9 | |||
| 800×800 | 683 | 915 | 12 | |||
| 1000×1000 | - | - | 15 | |||
| 1200×1200 | - | - | 18 | |||
| 1400×1400 | - | - | 21 | |||
| Working dimension(mm) | YAG | |||||
| 200×200 | 20 | 228 | 3 | |||
| 400×400 | 39 | 502 | 6 | |||
| 600×600 | 59 | 777 | 9 | |||
| 800×800 | - | - | 12 | |||
| 1000×1000 | - | - | 15 | |||
| 1200×1200 | - | - | 18 | |||
| 1400×1400 | - | - | 21 | |||
30 Series
| 30 Series | ||||||
| XY Specifications | ||||||
| Aperture | 30mm | |||||
| Beam displacement | 36.5mm | |||||
| Tracking error time | 550us | |||||
| Offset drift | 30urad/K | |||||
| Gain drift | 50ppm/K | |||||
| Step Response Time | ||||||
| 1% of full scale | - | |||||
| 10% of full scale | - | |||||
| Marking speed | 0.7m/s | |||||
| Positioning speed | 3m/s | |||||
| Writing Speed | ||||||
| Good quality | 220cps | |||||
| High quality | 150cps | |||||
| Repeatability | <15urad | |||||
| Drift over 8 hours | <0.1mrad | |||||
| After 30min Warm-Up and With Water Cooling | ||||||
| Typical scan angle | 40 degrees | |||||
| Interface | xY2-100 Enhanced | |||||
| Operating temperature | 25±10℃ | |||||
| Power requirements | ±15VDC,150W | |||||
| Driver mode | Digital | |||||
| Resolution | 16Bit | |||||
| Max laser power | 2500w | |||||
| Z Specifications | ||||||
| Maximum lens travel | ±1.5mm | |||||
| Tracking error time | 1ms | |||||
| Typical travel speed | 140mm/s | |||||
| Repeatability | 1um | |||||
| Long-term drift | 6um | |||||
| General Specifications | ||||||
| Aperture | 9mm | |||||
| Power requiremerns | ±15VDC,Max 10A | |||||
| Operating temperature | 25±10℃ | |||||
| Typical scan angle | 40 dgerees | |||||
| Interface | XY2-100 | |||||
| Working Filed & Spot Diameter | ||||||
| Spot diameter(um) | Working distance(mm) | Resolution(um) | ||||
| Working dimension(mm) | CO2 | |||||
| 200×200 | - | - | 3 | |||
| 400×400 | 247 | 502 | 6 | |||
| 600×600 | 367 | 777 | 9 | |||
| 800×800 | 428 | 915 | 12 | |||
| 1000×1000 | 607 | 1327 | 15 | |||
| 1200×1200 | - | - | 18 | |||
| 1400×1400 | - | - | 21 | |||
| Working dimension(mm) | YAG | |||||
| 200×200 | - | - | 3 | |||
| 400×400 | 26 | 502 | 6 | |||
| 600×600 | 38 | 777 | 9 | |||
| 800×800 | 45 | 915 | 12 | |||
| 1000×1000 | - | - | 15 | |||
| 1200×1200 | - | - | 18 | |||
| 1400×1400 | - | - | 21 | |||
50 Series
| 50 Series | ||||||
| XY Specifications | ||||||
| Aperture | 50mm | |||||
| Beam displacement | 58mm | |||||
| Tracking error time | 1.8ms | |||||
| Offset drift | 30urad/K | |||||
| Gain drift | 50ppm/K | |||||
| Step Response Time | ||||||
| 1% of full scale | - | |||||
| 10% of full scale | - | |||||
| Marking speed | 0.7m/s | |||||
| Positioning speed | 1.2m/s | |||||
| Writing Speed | ||||||
| Good quality | - | |||||
| High quality | - | |||||
| Repeatability | <15urad | |||||
| Drift over 8 hours | <0.1mrad | |||||
| After 30min Warm-Up and With Water Cooling | ||||||
| Typical scan angle | 40 degrees | |||||
| Interface | xY2-100 Enhanced | |||||
| Operating temperature | 25±10℃ | |||||
| Power requirements | ±15VDC,150W | |||||
| Driver mode | Digital | |||||
| Resolution | 16Bit | |||||
| Max laser power | >2500W | |||||
| Z Specifications | ||||||
| Maximum lens travel | ±1.5mm | |||||
| Tracking error time | 1ms | |||||
| Typical travel speed | 140mm/s | |||||
| Repeatability | 1um | |||||
| Long-term drift | 6um | |||||
| General Specifications | ||||||
| Aperture | 16mm | |||||
| Power requirements | ±15VDC,Max 10A | |||||
| Operating temperature | 25±10℃ | |||||
| Typical scan angle | 40 degrees | |||||
| Interface | XY2-100 | |||||
| Working Filed & Spot Diameter | ||||||
| Spot diameter(um) | Working distance(mm) | Resolution(um) | ||||
| Working dimension(mm) | CO2 | |||||
| 200×200 | - | - | 3 | |||
| 400×400 | - | - | 6 | |||
| 600×600 | 225 | 737 | 9 | |||
| 800×800 | 295 | 1012 | 12 | |||
| 1000×1000 | 367 | 1287 | 15 | |||
| 1200×1200 | 431 | 1561 | 18 | |||
| 1400×1400 | 498 | 1836 | 21 | |||
| Working dimension(mm) | YAG | |||||
| 200×200 | - | - | 3 | |||
| 400×400 | - | - | 6 | |||
| 600×600 | 23 | 737 | 9 | |||
| 800×800 | 30 | 1012 | 12 | |||
| 1000×1000 | 38 | 1287 | 15 | |||
| 1200×1200 | 45 | 1561 | 18 | |||
| 1400×1400 | 53 | 1836 | 21 | |||
Product detail pictures:
Related Product Guide:
Normally customer-oriented, and it's our ultimate concentrate on for being not only one of the most dependable, trustable and honest supplier, but also the partner for our shoppers for Chinese Professional Galvo Scanner Motor - 3D Dynamic Focusing Laser Galvo Scanner Head | Without F-theta – JCZ , The product will supply to all over the world, such as: Kuwait, Iran, Ethiopia, Our products are very popular in the word, like South American, Africa, Asia and so on. Companies to create first-class products as the goal, and strive to deliver customers with high quality solutions, present high-quality after-sales service and technical support, and customer mutual benefit, create a better career and future!
By Victoria from luzern - 2017.12.02 14:11
As an international trading company, we have numerous partners, but about your company, I just want to say, you are really good, wide range, good quality, reasonable prices, warm and thoughtful service, advanced technology and equipment and workers have professional training, feedback and product update is timely, in short, this is a very pleasant cooperation, and we look forward to the next cooperation!
By Olga from Argentina - 2017.01.28 18:53
