Fast delivery Laser And Engraving - 3D Dynamic Focusing Laser Galvo Scanner Head | Without F-theta – JCZ
Fast delivery Laser And Engraving - 3D Dynamic Focusing Laser Galvo Scanner Head | Without F-theta – JCZ Detail:
3 Axis X Y Z Laser Galvo Scanning Head without F-theta Lens for Large Field 2D and 3D surface marking, cutting…
The 3D dynamic focusing laser galvo is applied to laser cutting, laser scribing, welding, drilling, additive manufacturing, mould texture, relief engraving, auto-hub material-removing….
Available Laser Resource: 355, 532,1064,10640nm etc.
Product Picture
Specification
20 Series
30 Series
50 Series
20 Series
20 Series | ||||||
XY Specifications | ||||||
Aperture | 20mm | |||||
Beam displacement | 26.5mm | |||||
Tracking error time | 360us | |||||
Offset drift | 30urad/K | |||||
Gain drift | 50ppm/K | |||||
Step Response Time | ||||||
1% of full scale | - | |||||
10% of full scale | - | |||||
Marking speed | 1m/s | |||||
Positioning speed | 6m/s | |||||
Writing Speed |
||||||
Good quality | 320cps | |||||
High quality | 210cps | |||||
Repeatability | <15urad | |||||
Drift over 8 hours | <0.1mrad | |||||
After 30min Warm-Up and With Water Cooling | ||||||
Typical scan angle | 40 degrees | |||||
Interface | XY2-100 | |||||
Operating temperature | 25±10℃ | |||||
Power requirements | ±15VDC,150W | |||||
Driver mode | Digital | |||||
Resolution | 16Bit | |||||
Max laser power | 1000w | |||||
Z Specifications | ||||||
Maximum lens travel | ±1.5mm | |||||
Tracking error time | 1ms | |||||
Typical travel speed | 140mm/s | |||||
Repeatability | 1um | |||||
Long-term drift | 6um | |||||
General Specifications | ||||||
Aperture | 9mm | |||||
Power requirements | ±15VDC,Max 10A | |||||
Operating temperature | 25±10℃ | |||||
Typical scan angle | 40 degrees | |||||
Interface | XY2-100 | |||||
Working Filed & Spot Diameter | ||||||
Spot diameter(um) | Working distance(mm) | Resolution(um) | ||||
Working dimension(mm) | CO2 | |||||
200×200 | 214 | 228 | 3 | |||
400×400 | 402 | 502 | 6 | |||
600×600 | 589 | 777 | 9 | |||
800×800 | 683 | 915 | 12 | |||
1000×1000 | - | - | 15 | |||
1200×1200 | - | - | 18 | |||
1400×1400 | - | - | 21 | |||
Working dimension(mm) | YAG | |||||
200×200 | 20 | 228 | 3 | |||
400×400 | 39 | 502 | 6 | |||
600×600 | 59 | 777 | 9 | |||
800×800 | - | - | 12 | |||
1000×1000 | - | - | 15 | |||
1200×1200 | - | - | 18 | |||
1400×1400 | - | - | 21 |
30 Series
30 Series | ||||||
XY Specifications | ||||||
Aperture | 30mm | |||||
Beam displacement | 36.5mm | |||||
Tracking error time | 550us | |||||
Offset drift | 30urad/K | |||||
Gain drift | 50ppm/K | |||||
Step Response Time | ||||||
1% of full scale | - | |||||
10% of full scale | - | |||||
Marking speed | 0.7m/s | |||||
Positioning speed | 3m/s | |||||
Writing Speed | ||||||
Good quality | 220cps | |||||
High quality | 150cps | |||||
Repeatability | <15urad | |||||
Drift over 8 hours | <0.1mrad | |||||
After 30min Warm-Up and With Water Cooling | ||||||
Typical scan angle | 40 degrees | |||||
Interface | xY2-100 Enhanced | |||||
Operating temperature | 25±10℃ | |||||
Power requirements | ±15VDC,150W | |||||
Driver mode | Digital | |||||
Resolution | 16Bit | |||||
Max laser power | 2500w | |||||
Z Specifications | ||||||
Maximum lens travel | ±1.5mm | |||||
Tracking error time | 1ms | |||||
Typical travel speed | 140mm/s | |||||
Repeatability | 1um | |||||
Long-term drift | 6um | |||||
General Specifications | ||||||
Aperture | 9mm | |||||
Power requiremerns | ±15VDC,Max 10A | |||||
Operating temperature | 25±10℃ | |||||
Typical scan angle | 40 dgerees | |||||
Interface | XY2-100 | |||||
Working Filed & Spot Diameter | ||||||
Spot diameter(um) | Working distance(mm) | Resolution(um) | ||||
Working dimension(mm) | CO2 | |||||
200×200 | - | - | 3 | |||
400×400 | 247 | 502 | 6 | |||
600×600 | 367 | 777 | 9 | |||
800×800 | 428 | 915 | 12 | |||
1000×1000 | 607 | 1327 | 15 | |||
1200×1200 | - | - | 18 | |||
1400×1400 | - | - | 21 | |||
Working dimension(mm) | YAG | |||||
200×200 | - | - | 3 | |||
400×400 | 26 | 502 | 6 | |||
600×600 | 38 | 777 | 9 | |||
800×800 | 45 | 915 | 12 | |||
1000×1000 | - | - | 15 | |||
1200×1200 | - | - | 18 | |||
1400×1400 | - | - | 21 |
50 Series
50 Series | ||||||
XY Specifications | ||||||
Aperture | 50mm | |||||
Beam displacement | 58mm | |||||
Tracking error time | 1.8ms | |||||
Offset drift | 30urad/K | |||||
Gain drift | 50ppm/K | |||||
Step Response Time | ||||||
1% of full scale | - | |||||
10% of full scale | - | |||||
Marking speed | 0.7m/s | |||||
Positioning speed | 1.2m/s | |||||
Writing Speed | ||||||
Good quality | - | |||||
High quality | - | |||||
Repeatability | <15urad | |||||
Drift over 8 hours | <0.1mrad | |||||
After 30min Warm-Up and With Water Cooling | ||||||
Typical scan angle | 40 degrees | |||||
Interface | xY2-100 Enhanced | |||||
Operating temperature | 25±10℃ | |||||
Power requirements | ±15VDC,150W | |||||
Driver mode | Digital | |||||
Resolution | 16Bit | |||||
Max laser power | >2500W | |||||
Z Specifications | ||||||
Maximum lens travel | ±1.5mm | |||||
Tracking error time | 1ms | |||||
Typical travel speed | 140mm/s | |||||
Repeatability | 1um | |||||
Long-term drift | 6um | |||||
General Specifications | ||||||
Aperture | 16mm | |||||
Power requirements | ±15VDC,Max 10A | |||||
Operating temperature | 25±10℃ | |||||
Typical scan angle | 40 degrees | |||||
Interface | XY2-100 | |||||
Working Filed & Spot Diameter | ||||||
Spot diameter(um) | Working distance(mm) | Resolution(um) | ||||
Working dimension(mm) | CO2 | |||||
200×200 | - | - | 3 | |||
400×400 | - | - | 6 | |||
600×600 | 225 | 737 | 9 | |||
800×800 | 295 | 1012 | 12 | |||
1000×1000 | 367 | 1287 | 15 | |||
1200×1200 | 431 | 1561 | 18 | |||
1400×1400 | 498 | 1836 | 21 | |||
Working dimension(mm) | YAG | |||||
200×200 | - | - | 3 | |||
400×400 | - | - | 6 | |||
600×600 | 23 | 737 | 9 | |||
800×800 | 30 | 1012 | 12 | |||
1000×1000 | 38 | 1287 | 15 | |||
1200×1200 | 45 | 1561 | 18 | |||
1400×1400 | 53 | 1836 | 21 |
Product detail pictures:
Related Product Guide:
Our primary goal is to offer our clients a serious and responsible business relationship, providing personalized attention to all of them for Fast delivery Laser And Engraving - 3D Dynamic Focusing Laser Galvo Scanner Head | Without F-theta – JCZ , The product will supply to all over the world, such as: Kenya, Peru, Luxemburg, Selling our products and solutions causes no risks and brings high returns to your company instead. It is our consistent pursuit to create value for clients. Our company is looking for agents sincerely. What are you waiting for? Come and join us. Now or never.
By Nainesh Mehta from Bolivia - 2017.08.18 11:04
The factory has advanced equipment, experienced staffs and good management level, so product quality had assurance, this cooperation is very relaxed and happy!
By Martha from Australia - 2018.06.21 17:11