High Quality Trimmer Variable Resistor - 3D Dynamic Focusing Laser Galvo Scanner Head | Without F-theta – JCZ

Short Description:

Product Detail

Product Tags

Feedback (2)

We insist over the principle of development of 'High top quality, Performance, Sincerity and Down-to-earth working approach' to supply you with exceptional services of processing for Laser Marker Home Depot, Galvo Scanner, Co2 Laser Marking Magazine, We sincerely welcome you come to visit us. Hope we have good cooperation in the future.

High Quality Trimmer Variable Resistor - 3D Dynamic Focusing Laser Galvo Scanner Head | Without F-theta – JCZ Detail:

3 Axis X Y Z Laser Galvo Scanning Head without F-theta Lens for Large Field 2D and 3D surface marking, cutting…

The 3D dynamic focusing laser galvo is applied to laser cutting, laser scribing, welding, drilling, additive manufacturing, mould texture, relief engraving, auto-hub material-removing….

Available Laser Resource: 355, 532,1064,10640nm etc.

Product Picture

3D Dynamic Focusing Scan Head_Compressed-02-01

Specification

20 Series
30 Series
50 Series
20 Series

20 Series
XY Specifications
Aperture		20mm
Beam displacement		26.5mm
Tracking error time		360us
Offset drift		30urad/K
Gain drift		50ppm/K
Step Response Time
1% of full scale		-
10% of full scale		-
Marking speed		1m/s
Positioning speed		6m/s
Writing Speed
Good quality		320cps
High quality		210cps
Repeatability		<15urad
Drift over 8 hours		<0.1mrad
After 30min Warm-Up and With Water Cooling
Typical scan angle		40 degrees
Interface		XY2-100
Operating temperature		25±10℃
Power requirements		±15VDC,150W
Driver mode		Digital
Resolution		16Bit
Max laser power		1000w
Z Specifications
Maximum lens travel		±1.5mm
Tracking error time		1ms
Typical travel speed		140mm/s
Repeatability		1um
Long-term drift		6um
General Specifications
Aperture		9mm
Power requirements		±15VDC,Max 10A
Operating temperature		25±10℃
Typical scan angle		40 degrees
Interface		XY2-100
Working Filed & Spot Diameter
	Spot diameter(um)	Working distance(mm)	Resolution(um)
Working dimension(mm)	CO2
200×200	214	228	3
400×400	402	502	6
600×600	589	777	9
800×800	683	915	12
1000×1000	-	-	15
1200×1200	-	-	18
1400×1400	-	-	21

Working dimension(mm)	YAG
200×200	20	228	3
400×400	39	502	6
600×600	59	777	9
800×800	-	-	12
1000×1000	-	-	15
1200×1200	-	-	18
1400×1400	-	-	21

30 Series

30 Series
XY Specifications
Aperture		30mm
Beam displacement		36.5mm
Tracking error time		550us
Offset drift		30urad/K
Gain drift		50ppm/K
Step Response Time
1% of full scale		-
10% of full scale		-
Marking speed		0.7m/s
Positioning speed		3m/s
Writing Speed
Good quality		220cps
High quality		150cps
Repeatability		<15urad
Drift over 8 hours		<0.1mrad
After 30min Warm-Up and With Water Cooling
Typical scan angle		40 degrees
Interface		xY2-100 Enhanced
Operating temperature		25±10℃
Power requirements		±15VDC,150W
Driver mode		Digital
Resolution		16Bit
Max laser power		2500w
Z Specifications
Maximum lens travel		±1.5mm
Tracking error time		1ms
Typical travel speed		140mm/s
Repeatability		1um
Long-term drift		6um
General Specifications
Aperture		9mm
Power requiremerns		±15VDC,Max 10A
Operating temperature		25±10℃
Typical scan angle		40 dgerees
Interface		XY2-100
Working Filed & Spot Diameter
	Spot diameter(um)	Working distance(mm)	Resolution(um)
Working dimension(mm)	CO2
200×200	-	-	3
400×400	247	502	6
600×600	367	777	9
800×800	428	915	12
1000×1000	607	1327	15
1200×1200	-	-	18
1400×1400	-	-	21

Working dimension(mm)	YAG
200×200	-	-	3
400×400	26	502	6
600×600	38	777	9
800×800	45	915	12
1000×1000	-	-	15
1200×1200	-	-	18
1400×1400	-	-	21

50 Series

50 Series
XY Specifications
Aperture		50mm
Beam displacement		58mm
Tracking error time		1.8ms
Offset drift		30urad/K
Gain drift		50ppm/K
Step Response Time
1% of full scale		-
10% of full scale		-
Marking speed		0.7m/s
Positioning speed		1.2m/s
Writing Speed
Good quality		-
High quality		-
Repeatability		<15urad
Drift over 8 hours		<0.1mrad
After 30min Warm-Up and With Water Cooling
Typical scan angle		40 degrees
Interface		xY2-100 Enhanced
Operating temperature		25±10℃
Power requirements		±15VDC,150W
Driver mode		Digital
Resolution		16Bit
Max laser power		>2500W
Z Specifications
Maximum lens travel		±1.5mm
Tracking error time		1ms
Typical travel speed		140mm/s
Repeatability		1um
Long-term drift		6um
General Specifications
Aperture		16mm
Power requirements		±15VDC,Max 10A
Operating temperature		25±10℃
Typical scan angle		40 degrees
Interface		XY2-100
Working Filed & Spot Diameter
	Spot diameter(um)	Working distance(mm)	Resolution(um)
Working dimension(mm)	CO2
200×200	-	-	3
400×400	-	-	6
600×600	225	737	9
800×800	295	1012	12
1000×1000	367	1287	15
1200×1200	431	1561	18
1400×1400	498	1836	21

Working dimension(mm)	YAG
200×200	-	-	3
400×400	-	-	6
600×600	23	737	9
800×800	30	1012	12
1000×1000	38	1287	15
1200×1200	45	1561	18
1400×1400	53	1836	21

Product detail pictures:

Related Product Guide:

Bear Customer initially, High quality first in mind, we do the job closely with our customers and supply them with efficient and skilled providers for High Quality Trimmer Variable Resistor - 3D Dynamic Focusing Laser Galvo Scanner Head | Without F-theta – JCZ , The product will supply to all over the world, such as: Hamburg, Indonesia, Atlanta, They are sturdy modeling and promoting effectively all over the world. Never ever disappearing major functions within a quick time, it's a have to for you of fantastic good quality. Guided by the principle of Prudence, Efficiency, Union and Innovation. the corporation. ake an excellent efforts to expand its international trade, raise its organization. rofit and raise its export scale. We are confident that we are going to have a bright prospect and to be distributed all over the world in the years to come.

10k Trimmer Potentiometer