Hot New Products CO2 Laser Marking Machine - 3D Dynamic Focusing Laser Galvo Scanner Head | Without F-theta – JCZ
Hot New Products CO2 Laser Marking Machine - 3D Dynamic Focusing Laser Galvo Scanner Head | Without F-theta – JCZ Detail:
3 Axis X Y Z Laser Galvo Scanning Head without F-theta Lens for Large Field 2D and 3D surface marking, cutting…
The 3D dynamic focusing laser galvo is applied to laser cutting, laser scribing, welding, drilling, additive manufacturing, mould texture, relief engraving, auto-hub material-removing….
Available Laser Resource: 355, 532,1064,10640nm etc.
Product Picture
Specification
20 Series
30 Series
50 Series
20 Series
| 20 Series | ||||||
| XY Specifications | ||||||
| Aperture | 20mm | |||||
| Beam displacement | 26.5mm | |||||
| Tracking error time | 360us | |||||
| Offset drift | 30urad/K | |||||
| Gain drift | 50ppm/K | |||||
| Step Response Time | ||||||
| 1% of full scale | - | |||||
| 10% of full scale | - | |||||
| Marking speed | 1m/s | |||||
| Positioning speed | 6m/s | |||||
| Writing Speed |
||||||
| Good quality | 320cps | |||||
| High quality | 210cps | |||||
| Repeatability | <15urad | |||||
| Drift over 8 hours | <0.1mrad | |||||
| After 30min Warm-Up and With Water Cooling | ||||||
| Typical scan angle | 40 degrees | |||||
| Interface | XY2-100 | |||||
| Operating temperature | 25±10℃ | |||||
| Power requirements | ±15VDC,150W | |||||
| Driver mode | Digital | |||||
| Resolution | 16Bit | |||||
| Max laser power | 1000w | |||||
| Z Specifications | ||||||
| Maximum lens travel | ±1.5mm | |||||
| Tracking error time | 1ms | |||||
| Typical travel speed | 140mm/s | |||||
| Repeatability | 1um | |||||
| Long-term drift | 6um | |||||
| General Specifications | ||||||
| Aperture | 9mm | |||||
| Power requirements | ±15VDC,Max 10A | |||||
| Operating temperature | 25±10℃ | |||||
| Typical scan angle | 40 degrees | |||||
| Interface | XY2-100 | |||||
| Working Filed & Spot Diameter | ||||||
| Spot diameter(um) | Working distance(mm) | Resolution(um) | ||||
| Working dimension(mm) | CO2 | |||||
| 200×200 | 214 | 228 | 3 | |||
| 400×400 | 402 | 502 | 6 | |||
| 600×600 | 589 | 777 | 9 | |||
| 800×800 | 683 | 915 | 12 | |||
| 1000×1000 | - | - | 15 | |||
| 1200×1200 | - | - | 18 | |||
| 1400×1400 | - | - | 21 | |||
| Working dimension(mm) | YAG | |||||
| 200×200 | 20 | 228 | 3 | |||
| 400×400 | 39 | 502 | 6 | |||
| 600×600 | 59 | 777 | 9 | |||
| 800×800 | - | - | 12 | |||
| 1000×1000 | - | - | 15 | |||
| 1200×1200 | - | - | 18 | |||
| 1400×1400 | - | - | 21 | |||
30 Series
| 30 Series | ||||||
| XY Specifications | ||||||
| Aperture | 30mm | |||||
| Beam displacement | 36.5mm | |||||
| Tracking error time | 550us | |||||
| Offset drift | 30urad/K | |||||
| Gain drift | 50ppm/K | |||||
| Step Response Time | ||||||
| 1% of full scale | - | |||||
| 10% of full scale | - | |||||
| Marking speed | 0.7m/s | |||||
| Positioning speed | 3m/s | |||||
| Writing Speed | ||||||
| Good quality | 220cps | |||||
| High quality | 150cps | |||||
| Repeatability | <15urad | |||||
| Drift over 8 hours | <0.1mrad | |||||
| After 30min Warm-Up and With Water Cooling | ||||||
| Typical scan angle | 40 degrees | |||||
| Interface | xY2-100 Enhanced | |||||
| Operating temperature | 25±10℃ | |||||
| Power requirements | ±15VDC,150W | |||||
| Driver mode | Digital | |||||
| Resolution | 16Bit | |||||
| Max laser power | 2500w | |||||
| Z Specifications | ||||||
| Maximum lens travel | ±1.5mm | |||||
| Tracking error time | 1ms | |||||
| Typical travel speed | 140mm/s | |||||
| Repeatability | 1um | |||||
| Long-term drift | 6um | |||||
| General Specifications | ||||||
| Aperture | 9mm | |||||
| Power requiremerns | ±15VDC,Max 10A | |||||
| Operating temperature | 25±10℃ | |||||
| Typical scan angle | 40 dgerees | |||||
| Interface | XY2-100 | |||||
| Working Filed & Spot Diameter | ||||||
| Spot diameter(um) | Working distance(mm) | Resolution(um) | ||||
| Working dimension(mm) | CO2 | |||||
| 200×200 | - | - | 3 | |||
| 400×400 | 247 | 502 | 6 | |||
| 600×600 | 367 | 777 | 9 | |||
| 800×800 | 428 | 915 | 12 | |||
| 1000×1000 | 607 | 1327 | 15 | |||
| 1200×1200 | - | - | 18 | |||
| 1400×1400 | - | - | 21 | |||
| Working dimension(mm) | YAG | |||||
| 200×200 | - | - | 3 | |||
| 400×400 | 26 | 502 | 6 | |||
| 600×600 | 38 | 777 | 9 | |||
| 800×800 | 45 | 915 | 12 | |||
| 1000×1000 | - | - | 15 | |||
| 1200×1200 | - | - | 18 | |||
| 1400×1400 | - | - | 21 | |||
50 Series
| 50 Series | ||||||
| XY Specifications | ||||||
| Aperture | 50mm | |||||
| Beam displacement | 58mm | |||||
| Tracking error time | 1.8ms | |||||
| Offset drift | 30urad/K | |||||
| Gain drift | 50ppm/K | |||||
| Step Response Time | ||||||
| 1% of full scale | - | |||||
| 10% of full scale | - | |||||
| Marking speed | 0.7m/s | |||||
| Positioning speed | 1.2m/s | |||||
| Writing Speed | ||||||
| Good quality | - | |||||
| High quality | - | |||||
| Repeatability | <15urad | |||||
| Drift over 8 hours | <0.1mrad | |||||
| After 30min Warm-Up and With Water Cooling | ||||||
| Typical scan angle | 40 degrees | |||||
| Interface | xY2-100 Enhanced | |||||
| Operating temperature | 25±10℃ | |||||
| Power requirements | ±15VDC,150W | |||||
| Driver mode | Digital | |||||
| Resolution | 16Bit | |||||
| Max laser power | >2500W | |||||
| Z Specifications | ||||||
| Maximum lens travel | ±1.5mm | |||||
| Tracking error time | 1ms | |||||
| Typical travel speed | 140mm/s | |||||
| Repeatability | 1um | |||||
| Long-term drift | 6um | |||||
| General Specifications | ||||||
| Aperture | 16mm | |||||
| Power requirements | ±15VDC,Max 10A | |||||
| Operating temperature | 25±10℃ | |||||
| Typical scan angle | 40 degrees | |||||
| Interface | XY2-100 | |||||
| Working Filed & Spot Diameter | ||||||
| Spot diameter(um) | Working distance(mm) | Resolution(um) | ||||
| Working dimension(mm) | CO2 | |||||
| 200×200 | - | - | 3 | |||
| 400×400 | - | - | 6 | |||
| 600×600 | 225 | 737 | 9 | |||
| 800×800 | 295 | 1012 | 12 | |||
| 1000×1000 | 367 | 1287 | 15 | |||
| 1200×1200 | 431 | 1561 | 18 | |||
| 1400×1400 | 498 | 1836 | 21 | |||
| Working dimension(mm) | YAG | |||||
| 200×200 | - | - | 3 | |||
| 400×400 | - | - | 6 | |||
| 600×600 | 23 | 737 | 9 | |||
| 800×800 | 30 | 1012 | 12 | |||
| 1000×1000 | 38 | 1287 | 15 | |||
| 1200×1200 | 45 | 1561 | 18 | |||
| 1400×1400 | 53 | 1836 | 21 | |||
Product detail pictures:
Related Product Guide:
It can be our duty to satisfy your preferences and successfully serve you. Your pleasure is our best reward. We have been looking forward to the go to for joint expansion for Hot New Products CO2 Laser Marking Machine - 3D Dynamic Focusing Laser Galvo Scanner Head | Without F-theta – JCZ , The product will supply to all over the world, such as: Munich, Estonia, Botswana, They are sturdy modeling and promoting effectively all over the world. Never ever disappearing major functions within a quick time, it's a have to in your case of fantastic good quality. Guided by the principle of Prudence, Efficiency, Union and Innovation. the corporation. ake an excellent efforts to expand its international trade, raise its organization. rofit and raise its export scale. We've been confident that we've been going to have a bright prospect and to be distributed all over the world in the years to come.
By Rosalind from Tanzania - 2018.09.08 17:09
This is a reputable company, they have a high level of business management, good quality product and service, every cooperation is assured and delighted!
By Cora from Mexico - 2017.03.08 14:45
