Hot New Products Vertical Platform Lift - 3D Dynamic Focusing Laser Galvo Scanner Head | Without F-theta – JCZ
Hot New Products Vertical Platform Lift - 3D Dynamic Focusing Laser Galvo Scanner Head | Without F-theta – JCZ Detail:
3 Axis X Y Z Laser Galvo Scanning Head without F-theta Lens for Large Field 2D and 3D surface marking, cutting…
The 3D dynamic focusing laser galvo is applied to laser cutting, laser scribing, welding, drilling, additive manufacturing, mould texture, relief engraving, auto-hub material-removing….
Available Laser Resource: 355, 532,1064,10640nm etc.
Product Picture
Specification
20 Series
30 Series
50 Series
20 Series
| 20 Series | ||||||
| XY Specifications | ||||||
| Aperture | 20mm | |||||
| Beam displacement | 26.5mm | |||||
| Tracking error time | 360us | |||||
| Offset drift | 30urad/K | |||||
| Gain drift | 50ppm/K | |||||
| Step Response Time | ||||||
| 1% of full scale | - | |||||
| 10% of full scale | - | |||||
| Marking speed | 1m/s | |||||
| Positioning speed | 6m/s | |||||
| Writing Speed |
||||||
| Good quality | 320cps | |||||
| High quality | 210cps | |||||
| Repeatability | <15urad | |||||
| Drift over 8 hours | <0.1mrad | |||||
| After 30min Warm-Up and With Water Cooling | ||||||
| Typical scan angle | 40 degrees | |||||
| Interface | XY2-100 | |||||
| Operating temperature | 25±10℃ | |||||
| Power requirements | ±15VDC,150W | |||||
| Driver mode | Digital | |||||
| Resolution | 16Bit | |||||
| Max laser power | 1000w | |||||
| Z Specifications | ||||||
| Maximum lens travel | ±1.5mm | |||||
| Tracking error time | 1ms | |||||
| Typical travel speed | 140mm/s | |||||
| Repeatability | 1um | |||||
| Long-term drift | 6um | |||||
| General Specifications | ||||||
| Aperture | 9mm | |||||
| Power requirements | ±15VDC,Max 10A | |||||
| Operating temperature | 25±10℃ | |||||
| Typical scan angle | 40 degrees | |||||
| Interface | XY2-100 | |||||
| Working Filed & Spot Diameter | ||||||
| Spot diameter(um) | Working distance(mm) | Resolution(um) | ||||
| Working dimension(mm) | CO2 | |||||
| 200×200 | 214 | 228 | 3 | |||
| 400×400 | 402 | 502 | 6 | |||
| 600×600 | 589 | 777 | 9 | |||
| 800×800 | 683 | 915 | 12 | |||
| 1000×1000 | - | - | 15 | |||
| 1200×1200 | - | - | 18 | |||
| 1400×1400 | - | - | 21 | |||
| Working dimension(mm) | YAG | |||||
| 200×200 | 20 | 228 | 3 | |||
| 400×400 | 39 | 502 | 6 | |||
| 600×600 | 59 | 777 | 9 | |||
| 800×800 | - | - | 12 | |||
| 1000×1000 | - | - | 15 | |||
| 1200×1200 | - | - | 18 | |||
| 1400×1400 | - | - | 21 | |||
30 Series
| 30 Series | ||||||
| XY Specifications | ||||||
| Aperture | 30mm | |||||
| Beam displacement | 36.5mm | |||||
| Tracking error time | 550us | |||||
| Offset drift | 30urad/K | |||||
| Gain drift | 50ppm/K | |||||
| Step Response Time | ||||||
| 1% of full scale | - | |||||
| 10% of full scale | - | |||||
| Marking speed | 0.7m/s | |||||
| Positioning speed | 3m/s | |||||
| Writing Speed | ||||||
| Good quality | 220cps | |||||
| High quality | 150cps | |||||
| Repeatability | <15urad | |||||
| Drift over 8 hours | <0.1mrad | |||||
| After 30min Warm-Up and With Water Cooling | ||||||
| Typical scan angle | 40 degrees | |||||
| Interface | xY2-100 Enhanced | |||||
| Operating temperature | 25±10℃ | |||||
| Power requirements | ±15VDC,150W | |||||
| Driver mode | Digital | |||||
| Resolution | 16Bit | |||||
| Max laser power | 2500w | |||||
| Z Specifications | ||||||
| Maximum lens travel | ±1.5mm | |||||
| Tracking error time | 1ms | |||||
| Typical travel speed | 140mm/s | |||||
| Repeatability | 1um | |||||
| Long-term drift | 6um | |||||
| General Specifications | ||||||
| Aperture | 9mm | |||||
| Power requiremerns | ±15VDC,Max 10A | |||||
| Operating temperature | 25±10℃ | |||||
| Typical scan angle | 40 dgerees | |||||
| Interface | XY2-100 | |||||
| Working Filed & Spot Diameter | ||||||
| Spot diameter(um) | Working distance(mm) | Resolution(um) | ||||
| Working dimension(mm) | CO2 | |||||
| 200×200 | - | - | 3 | |||
| 400×400 | 247 | 502 | 6 | |||
| 600×600 | 367 | 777 | 9 | |||
| 800×800 | 428 | 915 | 12 | |||
| 1000×1000 | 607 | 1327 | 15 | |||
| 1200×1200 | - | - | 18 | |||
| 1400×1400 | - | - | 21 | |||
| Working dimension(mm) | YAG | |||||
| 200×200 | - | - | 3 | |||
| 400×400 | 26 | 502 | 6 | |||
| 600×600 | 38 | 777 | 9 | |||
| 800×800 | 45 | 915 | 12 | |||
| 1000×1000 | - | - | 15 | |||
| 1200×1200 | - | - | 18 | |||
| 1400×1400 | - | - | 21 | |||
50 Series
| 50 Series | ||||||
| XY Specifications | ||||||
| Aperture | 50mm | |||||
| Beam displacement | 58mm | |||||
| Tracking error time | 1.8ms | |||||
| Offset drift | 30urad/K | |||||
| Gain drift | 50ppm/K | |||||
| Step Response Time | ||||||
| 1% of full scale | - | |||||
| 10% of full scale | - | |||||
| Marking speed | 0.7m/s | |||||
| Positioning speed | 1.2m/s | |||||
| Writing Speed | ||||||
| Good quality | - | |||||
| High quality | - | |||||
| Repeatability | <15urad | |||||
| Drift over 8 hours | <0.1mrad | |||||
| After 30min Warm-Up and With Water Cooling | ||||||
| Typical scan angle | 40 degrees | |||||
| Interface | xY2-100 Enhanced | |||||
| Operating temperature | 25±10℃ | |||||
| Power requirements | ±15VDC,150W | |||||
| Driver mode | Digital | |||||
| Resolution | 16Bit | |||||
| Max laser power | >2500W | |||||
| Z Specifications | ||||||
| Maximum lens travel | ±1.5mm | |||||
| Tracking error time | 1ms | |||||
| Typical travel speed | 140mm/s | |||||
| Repeatability | 1um | |||||
| Long-term drift | 6um | |||||
| General Specifications | ||||||
| Aperture | 16mm | |||||
| Power requirements | ±15VDC,Max 10A | |||||
| Operating temperature | 25±10℃ | |||||
| Typical scan angle | 40 degrees | |||||
| Interface | XY2-100 | |||||
| Working Filed & Spot Diameter | ||||||
| Spot diameter(um) | Working distance(mm) | Resolution(um) | ||||
| Working dimension(mm) | CO2 | |||||
| 200×200 | - | - | 3 | |||
| 400×400 | - | - | 6 | |||
| 600×600 | 225 | 737 | 9 | |||
| 800×800 | 295 | 1012 | 12 | |||
| 1000×1000 | 367 | 1287 | 15 | |||
| 1200×1200 | 431 | 1561 | 18 | |||
| 1400×1400 | 498 | 1836 | 21 | |||
| Working dimension(mm) | YAG | |||||
| 200×200 | - | - | 3 | |||
| 400×400 | - | - | 6 | |||
| 600×600 | 23 | 737 | 9 | |||
| 800×800 | 30 | 1012 | 12 | |||
| 1000×1000 | 38 | 1287 | 15 | |||
| 1200×1200 | 45 | 1561 | 18 | |||
| 1400×1400 | 53 | 1836 | 21 | |||
Product detail pictures:
Related Product Guide:
Our eternal pursuits are the attitude of regard the market, regard the custom, regard the science as well as theory of quality the basic, have faith in the initial and administration the advanced for Hot New Products Vertical Platform Lift - 3D Dynamic Focusing Laser Galvo Scanner Head | Without F-theta – JCZ , The product will supply to all over the world, such as: Seychelles, Guatemala, Bangladesh, If you give us a list of products you are interested in, along with makes and models, we can send you quotations. Please email us directly. Our goal is to establish long-term and mutually profitable business relationships with domestic and overseas clients. We look forward to receiving your reply soon.
By Eleanore from India - 2017.11.01 17:04
The company account manager has a wealth of industry knowledge and experience, he could provide appropriate program according our needs and speak English fluently.
By Maureen from Albania - 2018.12.05 13:53
