Manufacturing Companies for Uv Fiber Laser - 3D Dynamic Focusing Laser Galvo Scanner Head | Without F-theta – JCZ
Manufacturing Companies for Uv Fiber Laser - 3D Dynamic Focusing Laser Galvo Scanner Head | Without F-theta – JCZ Detail:
3 Axis X Y Z Laser Galvo Scanning Head without F-theta Lens for Large Field 2D and 3D surface marking, cutting…
The 3D dynamic focusing laser galvo is applied to laser cutting, laser scribing, welding, drilling, additive manufacturing, mould texture, relief engraving, auto-hub material-removing….
Available Laser Resource: 355, 532,1064,10640nm etc.
Product Picture
Specification
20 Series
30 Series
50 Series
20 Series
20 Series | ||||||
XY Specifications | ||||||
Aperture | 20mm | |||||
Beam displacement | 26.5mm | |||||
Tracking error time | 360us | |||||
Offset drift | 30urad/K | |||||
Gain drift | 50ppm/K | |||||
Step Response Time | ||||||
1% of full scale | - | |||||
10% of full scale | - | |||||
Marking speed | 1m/s | |||||
Positioning speed | 6m/s | |||||
Writing Speed |
||||||
Good quality | 320cps | |||||
High quality | 210cps | |||||
Repeatability | <15urad | |||||
Drift over 8 hours | <0.1mrad | |||||
After 30min Warm-Up and With Water Cooling | ||||||
Typical scan angle | 40 degrees | |||||
Interface | XY2-100 | |||||
Operating temperature | 25±10℃ | |||||
Power requirements | ±15VDC,150W | |||||
Driver mode | Digital | |||||
Resolution | 16Bit | |||||
Max laser power | 1000w | |||||
Z Specifications | ||||||
Maximum lens travel | ±1.5mm | |||||
Tracking error time | 1ms | |||||
Typical travel speed | 140mm/s | |||||
Repeatability | 1um | |||||
Long-term drift | 6um | |||||
General Specifications | ||||||
Aperture | 9mm | |||||
Power requirements | ±15VDC,Max 10A | |||||
Operating temperature | 25±10℃ | |||||
Typical scan angle | 40 degrees | |||||
Interface | XY2-100 | |||||
Working Filed & Spot Diameter | ||||||
Spot diameter(um) | Working distance(mm) | Resolution(um) | ||||
Working dimension(mm) | CO2 | |||||
200×200 | 214 | 228 | 3 | |||
400×400 | 402 | 502 | 6 | |||
600×600 | 589 | 777 | 9 | |||
800×800 | 683 | 915 | 12 | |||
1000×1000 | - | - | 15 | |||
1200×1200 | - | - | 18 | |||
1400×1400 | - | - | 21 | |||
Working dimension(mm) | YAG | |||||
200×200 | 20 | 228 | 3 | |||
400×400 | 39 | 502 | 6 | |||
600×600 | 59 | 777 | 9 | |||
800×800 | - | - | 12 | |||
1000×1000 | - | - | 15 | |||
1200×1200 | - | - | 18 | |||
1400×1400 | - | - | 21 |
30 Series
30 Series | ||||||
XY Specifications | ||||||
Aperture | 30mm | |||||
Beam displacement | 36.5mm | |||||
Tracking error time | 550us | |||||
Offset drift | 30urad/K | |||||
Gain drift | 50ppm/K | |||||
Step Response Time | ||||||
1% of full scale | - | |||||
10% of full scale | - | |||||
Marking speed | 0.7m/s | |||||
Positioning speed | 3m/s | |||||
Writing Speed | ||||||
Good quality | 220cps | |||||
High quality | 150cps | |||||
Repeatability | <15urad | |||||
Drift over 8 hours | <0.1mrad | |||||
After 30min Warm-Up and With Water Cooling | ||||||
Typical scan angle | 40 degrees | |||||
Interface | xY2-100 Enhanced | |||||
Operating temperature | 25±10℃ | |||||
Power requirements | ±15VDC,150W | |||||
Driver mode | Digital | |||||
Resolution | 16Bit | |||||
Max laser power | 2500w | |||||
Z Specifications | ||||||
Maximum lens travel | ±1.5mm | |||||
Tracking error time | 1ms | |||||
Typical travel speed | 140mm/s | |||||
Repeatability | 1um | |||||
Long-term drift | 6um | |||||
General Specifications | ||||||
Aperture | 9mm | |||||
Power requiremerns | ±15VDC,Max 10A | |||||
Operating temperature | 25±10℃ | |||||
Typical scan angle | 40 dgerees | |||||
Interface | XY2-100 | |||||
Working Filed & Spot Diameter | ||||||
Spot diameter(um) | Working distance(mm) | Resolution(um) | ||||
Working dimension(mm) | CO2 | |||||
200×200 | - | - | 3 | |||
400×400 | 247 | 502 | 6 | |||
600×600 | 367 | 777 | 9 | |||
800×800 | 428 | 915 | 12 | |||
1000×1000 | 607 | 1327 | 15 | |||
1200×1200 | - | - | 18 | |||
1400×1400 | - | - | 21 | |||
Working dimension(mm) | YAG | |||||
200×200 | - | - | 3 | |||
400×400 | 26 | 502 | 6 | |||
600×600 | 38 | 777 | 9 | |||
800×800 | 45 | 915 | 12 | |||
1000×1000 | - | - | 15 | |||
1200×1200 | - | - | 18 | |||
1400×1400 | - | - | 21 |
50 Series
50 Series | ||||||
XY Specifications | ||||||
Aperture | 50mm | |||||
Beam displacement | 58mm | |||||
Tracking error time | 1.8ms | |||||
Offset drift | 30urad/K | |||||
Gain drift | 50ppm/K | |||||
Step Response Time | ||||||
1% of full scale | - | |||||
10% of full scale | - | |||||
Marking speed | 0.7m/s | |||||
Positioning speed | 1.2m/s | |||||
Writing Speed | ||||||
Good quality | - | |||||
High quality | - | |||||
Repeatability | <15urad | |||||
Drift over 8 hours | <0.1mrad | |||||
After 30min Warm-Up and With Water Cooling | ||||||
Typical scan angle | 40 degrees | |||||
Interface | xY2-100 Enhanced | |||||
Operating temperature | 25±10℃ | |||||
Power requirements | ±15VDC,150W | |||||
Driver mode | Digital | |||||
Resolution | 16Bit | |||||
Max laser power | >2500W | |||||
Z Specifications | ||||||
Maximum lens travel | ±1.5mm | |||||
Tracking error time | 1ms | |||||
Typical travel speed | 140mm/s | |||||
Repeatability | 1um | |||||
Long-term drift | 6um | |||||
General Specifications | ||||||
Aperture | 16mm | |||||
Power requirements | ±15VDC,Max 10A | |||||
Operating temperature | 25±10℃ | |||||
Typical scan angle | 40 degrees | |||||
Interface | XY2-100 | |||||
Working Filed & Spot Diameter | ||||||
Spot diameter(um) | Working distance(mm) | Resolution(um) | ||||
Working dimension(mm) | CO2 | |||||
200×200 | - | - | 3 | |||
400×400 | - | - | 6 | |||
600×600 | 225 | 737 | 9 | |||
800×800 | 295 | 1012 | 12 | |||
1000×1000 | 367 | 1287 | 15 | |||
1200×1200 | 431 | 1561 | 18 | |||
1400×1400 | 498 | 1836 | 21 | |||
Working dimension(mm) | YAG | |||||
200×200 | - | - | 3 | |||
400×400 | - | - | 6 | |||
600×600 | 23 | 737 | 9 | |||
800×800 | 30 | 1012 | 12 | |||
1000×1000 | 38 | 1287 | 15 | |||
1200×1200 | 45 | 1561 | 18 | |||
1400×1400 | 53 | 1836 | 21 |
Product detail pictures:
Related Product Guide:
As for competitive prices, we believe that you will be searching far and wide for anything that can beat us. We can state with absolute certainty that for such quality at such prices we are the lowest around for Manufacturing Companies for Uv Fiber Laser - 3D Dynamic Focusing Laser Galvo Scanner Head | Without F-theta – JCZ , The product will supply to all over the world, such as: Japan, Indonesia, Rotterdam, We are sticking to excellent quality, competitive price and punctual delivery and better service, and sincerely hope to establish long-term good relationships and cooperation with our new and old business partners from all over the world. Sincerely welcome you to join us.
By Olga from South Korea - 2018.11.06 10:04
This is a very professional and honest Chinese supplier, from now on we fell in love with the Chinese manufacturing.
By Agnes from Kenya - 2017.02.14 13:19