New Delivery for Co2 Laser Metal Marking - 3D Dynamic Focusing Laser Galvo Scanner Head | Without F-theta – JCZ
New Delivery for Co2 Laser Metal Marking - 3D Dynamic Focusing Laser Galvo Scanner Head | Without F-theta – JCZ Detail:
3 Axis X Y Z Laser Galvo Scanning Head without F-theta Lens for Large Field 2D and 3D surface marking, cutting…
The 3D dynamic focusing laser galvo is applied to laser cutting, laser scribing, welding, drilling, additive manufacturing, mould texture, relief engraving, auto-hub material-removing….
Available Laser Resource: 355, 532,1064,10640nm etc.
Product Picture
Specification
20 Series
30 Series
50 Series
20 Series
20 Series | ||||||
XY Specifications | ||||||
Aperture | 20mm | |||||
Beam displacement | 26.5mm | |||||
Tracking error time | 360us | |||||
Offset drift | 30urad/K | |||||
Gain drift | 50ppm/K | |||||
Step Response Time | ||||||
1% of full scale | - | |||||
10% of full scale | - | |||||
Marking speed | 1m/s | |||||
Positioning speed | 6m/s | |||||
Writing Speed |
||||||
Good quality | 320cps | |||||
High quality | 210cps | |||||
Repeatability | <15urad | |||||
Drift over 8 hours | <0.1mrad | |||||
After 30min Warm-Up and With Water Cooling | ||||||
Typical scan angle | 40 degrees | |||||
Interface | XY2-100 | |||||
Operating temperature | 25±10℃ | |||||
Power requirements | ±15VDC,150W | |||||
Driver mode | Digital | |||||
Resolution | 16Bit | |||||
Max laser power | 1000w | |||||
Z Specifications | ||||||
Maximum lens travel | ±1.5mm | |||||
Tracking error time | 1ms | |||||
Typical travel speed | 140mm/s | |||||
Repeatability | 1um | |||||
Long-term drift | 6um | |||||
General Specifications | ||||||
Aperture | 9mm | |||||
Power requirements | ±15VDC,Max 10A | |||||
Operating temperature | 25±10℃ | |||||
Typical scan angle | 40 degrees | |||||
Interface | XY2-100 | |||||
Working Filed & Spot Diameter | ||||||
Spot diameter(um) | Working distance(mm) | Resolution(um) | ||||
Working dimension(mm) | CO2 | |||||
200×200 | 214 | 228 | 3 | |||
400×400 | 402 | 502 | 6 | |||
600×600 | 589 | 777 | 9 | |||
800×800 | 683 | 915 | 12 | |||
1000×1000 | - | - | 15 | |||
1200×1200 | - | - | 18 | |||
1400×1400 | - | - | 21 | |||
Working dimension(mm) | YAG | |||||
200×200 | 20 | 228 | 3 | |||
400×400 | 39 | 502 | 6 | |||
600×600 | 59 | 777 | 9 | |||
800×800 | - | - | 12 | |||
1000×1000 | - | - | 15 | |||
1200×1200 | - | - | 18 | |||
1400×1400 | - | - | 21 |
30 Series
30 Series | ||||||
XY Specifications | ||||||
Aperture | 30mm | |||||
Beam displacement | 36.5mm | |||||
Tracking error time | 550us | |||||
Offset drift | 30urad/K | |||||
Gain drift | 50ppm/K | |||||
Step Response Time | ||||||
1% of full scale | - | |||||
10% of full scale | - | |||||
Marking speed | 0.7m/s | |||||
Positioning speed | 3m/s | |||||
Writing Speed | ||||||
Good quality | 220cps | |||||
High quality | 150cps | |||||
Repeatability | <15urad | |||||
Drift over 8 hours | <0.1mrad | |||||
After 30min Warm-Up and With Water Cooling | ||||||
Typical scan angle | 40 degrees | |||||
Interface | xY2-100 Enhanced | |||||
Operating temperature | 25±10℃ | |||||
Power requirements | ±15VDC,150W | |||||
Driver mode | Digital | |||||
Resolution | 16Bit | |||||
Max laser power | 2500w | |||||
Z Specifications | ||||||
Maximum lens travel | ±1.5mm | |||||
Tracking error time | 1ms | |||||
Typical travel speed | 140mm/s | |||||
Repeatability | 1um | |||||
Long-term drift | 6um | |||||
General Specifications | ||||||
Aperture | 9mm | |||||
Power requiremerns | ±15VDC,Max 10A | |||||
Operating temperature | 25±10℃ | |||||
Typical scan angle | 40 dgerees | |||||
Interface | XY2-100 | |||||
Working Filed & Spot Diameter | ||||||
Spot diameter(um) | Working distance(mm) | Resolution(um) | ||||
Working dimension(mm) | CO2 | |||||
200×200 | - | - | 3 | |||
400×400 | 247 | 502 | 6 | |||
600×600 | 367 | 777 | 9 | |||
800×800 | 428 | 915 | 12 | |||
1000×1000 | 607 | 1327 | 15 | |||
1200×1200 | - | - | 18 | |||
1400×1400 | - | - | 21 | |||
Working dimension(mm) | YAG | |||||
200×200 | - | - | 3 | |||
400×400 | 26 | 502 | 6 | |||
600×600 | 38 | 777 | 9 | |||
800×800 | 45 | 915 | 12 | |||
1000×1000 | - | - | 15 | |||
1200×1200 | - | - | 18 | |||
1400×1400 | - | - | 21 |
50 Series
50 Series | ||||||
XY Specifications | ||||||
Aperture | 50mm | |||||
Beam displacement | 58mm | |||||
Tracking error time | 1.8ms | |||||
Offset drift | 30urad/K | |||||
Gain drift | 50ppm/K | |||||
Step Response Time | ||||||
1% of full scale | - | |||||
10% of full scale | - | |||||
Marking speed | 0.7m/s | |||||
Positioning speed | 1.2m/s | |||||
Writing Speed | ||||||
Good quality | - | |||||
High quality | - | |||||
Repeatability | <15urad | |||||
Drift over 8 hours | <0.1mrad | |||||
After 30min Warm-Up and With Water Cooling | ||||||
Typical scan angle | 40 degrees | |||||
Interface | xY2-100 Enhanced | |||||
Operating temperature | 25±10℃ | |||||
Power requirements | ±15VDC,150W | |||||
Driver mode | Digital | |||||
Resolution | 16Bit | |||||
Max laser power | >2500W | |||||
Z Specifications | ||||||
Maximum lens travel | ±1.5mm | |||||
Tracking error time | 1ms | |||||
Typical travel speed | 140mm/s | |||||
Repeatability | 1um | |||||
Long-term drift | 6um | |||||
General Specifications | ||||||
Aperture | 16mm | |||||
Power requirements | ±15VDC,Max 10A | |||||
Operating temperature | 25±10℃ | |||||
Typical scan angle | 40 degrees | |||||
Interface | XY2-100 | |||||
Working Filed & Spot Diameter | ||||||
Spot diameter(um) | Working distance(mm) | Resolution(um) | ||||
Working dimension(mm) | CO2 | |||||
200×200 | - | - | 3 | |||
400×400 | - | - | 6 | |||
600×600 | 225 | 737 | 9 | |||
800×800 | 295 | 1012 | 12 | |||
1000×1000 | 367 | 1287 | 15 | |||
1200×1200 | 431 | 1561 | 18 | |||
1400×1400 | 498 | 1836 | 21 | |||
Working dimension(mm) | YAG | |||||
200×200 | - | - | 3 | |||
400×400 | - | - | 6 | |||
600×600 | 23 | 737 | 9 | |||
800×800 | 30 | 1012 | 12 | |||
1000×1000 | 38 | 1287 | 15 | |||
1200×1200 | 45 | 1561 | 18 | |||
1400×1400 | 53 | 1836 | 21 |
Product detail pictures:
Related Product Guide:
We are experienced manufacturer. Wining the majority from the crucial certifications of its market for New Delivery for Co2 Laser Metal Marking - 3D Dynamic Focusing Laser Galvo Scanner Head | Without F-theta – JCZ , The product will supply to all over the world, such as: Bhutan, Anguilla, Kenya, Furthermore, all of our products are manufactured with advanced equipment and strict QC procedures in order to ensure high quality. If you are interested in any of our products, please don't hesitate to contact us. We will do our best to meet your needs.
By Prima from Benin - 2017.12.09 14:01
We are really happy to find such a manufacturer that ensuring product quality at the same time the price is very cheap.
By Ivy from Lithuania - 2017.09.30 16:36