English
  • Laser Marking Control Software
  • Laser Controller
  • Laser Galvo Scanner Head
  • Fiber/UV/CO2 /Green/Picosecond/Femtosecond Laser
  • Laser Optics
  • OEM/OEM Laser Machines | Marking | Welding | Cutting | Cleaning | Trimming

OEM Supply Laser Etching Engraving - 3D Dynamic Focusing Laser Galvo Scanner Head | Without F-theta – JCZ

OEM Supply Laser Etching Engraving - 3D Dynamic Focusing Laser Galvo Scanner Head | Without F-theta – JCZ Featured Image
  • OEM Supply Laser Etching Engraving - 3D Dynamic Focusing Laser Galvo Scanner Head | Without F-theta – JCZ
  • OEM Supply Laser Etching Engraving - 3D Dynamic Focusing Laser Galvo Scanner Head | Without F-theta – JCZ
  • OEM Supply Laser Etching Engraving - 3D Dynamic Focusing Laser Galvo Scanner Head | Without F-theta – JCZ

Short Description:


Product Detail

Product Tags

Related Video

Feedback (2)

We've been proud with the significant shopper fulfillment and wide acceptance due to our persistent pursuit of top of the range both of those on solution and repair for Mould Surface Laser Texture Engraving Machine, Laser Carve Software, Uv Laser Marking, Welcomes all abroad close friends and retailers to ascertain collaboration with us. We are going to give you with genuine, high-quality and successful company to satisfy your requirements.
OEM Supply Laser Etching Engraving - 3D Dynamic Focusing Laser Galvo Scanner Head | Without F-theta – JCZ Detail:

3 Axis X Y Z Laser Galvo Scanning Head without F-theta Lens for Large Field 2D and 3D surface marking, cutting…

The 3D dynamic focusing laser galvo is applied to laser cutting, laser scribing, welding,  drilling, additive manufacturing, mould texture, relief engraving, auto-hub material-removing….

Available Laser Resource: 355, 532,1064,10640nm etc.

Product Picture

3D Dynamic Focusing Scan Head_Compressed-02-01
3D Dynamic Focusing Scan Head_Compressed-01-01
3D Dynamic Focusing scan

Specification

20 Series
30 Series
50 Series
20 Series

20 Series
XY Specifications
Aperture 20mm
Beam displacement 26.5mm
Tracking error time 360us
Offset drift 30urad/K
Gain drift 50ppm/K
Step Response Time
1% of full scale -
10% of full scale -
Marking speed 1m/s
Positioning speed 6m/s
Writing Speed
Good quality 320cps
High quality 210cps
Repeatability <15urad
Drift over 8 hours <0.1mrad
After 30min Warm-Up and With Water Cooling
Typical scan angle 40 degrees
Interface XY2-100
Operating temperature 25±10℃
Power requirements ±15VDC,150W
Driver mode Digital
Resolution 16Bit
Max laser power 1000w
Z Specifications
Maximum lens travel ±1.5mm
Tracking error time 1ms
Typical travel speed 140mm/s
Repeatability 1um
Long-term drift 6um
General Specifications
Aperture 9mm
Power requirements ±15VDC,Max 10A
Operating temperature 25±10℃
Typical scan angle 40 degrees
Interface XY2-100
Working Filed & Spot Diameter
Spot diameter(um) Working distance(mm) Resolution(um)
Working dimension(mm) CO2
200×200 214 228 3
400×400 402 502 6
600×600 589 777 9
800×800 683 915 12
1000×1000 - - 15
1200×1200 - - 18
1400×1400 - - 21
Working dimension(mm) YAG
200×200 20 228 3
400×400 39 502 6
600×600 59 777 9
800×800 - - 12
1000×1000 - - 15
1200×1200 - - 18
1400×1400 - - 21

30 Series

30 Series
XY Specifications
Aperture 30mm
Beam displacement 36.5mm
Tracking error time 550us
Offset drift 30urad/K
Gain drift 50ppm/K
Step Response Time
1% of full scale -
10% of full scale -
Marking speed 0.7m/s
Positioning speed 3m/s
Writing Speed
Good quality 220cps
High quality 150cps
Repeatability <15urad
Drift over 8 hours <0.1mrad
After 30min Warm-Up and With Water Cooling
Typical scan angle 40 degrees
Interface xY2-100 Enhanced
Operating temperature 25±10℃
Power requirements ±15VDC,150W
Driver mode Digital
Resolution 16Bit
Max laser power 2500w
Z Specifications
Maximum lens travel ±1.5mm
Tracking error time 1ms
Typical travel speed 140mm/s
Repeatability 1um
Long-term drift 6um
General Specifications
Aperture 9mm
Power requiremerns ±15VDC,Max 10A
Operating temperature 25±10℃
Typical scan angle 40 dgerees
Interface XY2-100
Working Filed & Spot Diameter
Spot diameter(um) Working distance(mm) Resolution(um)
Working dimension(mm) CO2
200×200 - - 3
400×400 247 502 6
600×600 367 777 9
800×800 428 915 12
1000×1000 607 1327 15
1200×1200 - - 18
1400×1400 - - 21
Working dimension(mm) YAG
200×200 - - 3
400×400 26 502 6
600×600 38 777 9
800×800 45 915 12
1000×1000 - - 15
1200×1200 - - 18
1400×1400 - - 21

50 Series

50 Series
XY Specifications
Aperture 50mm
Beam displacement 58mm
Tracking error time 1.8ms
Offset drift 30urad/K
Gain drift 50ppm/K
Step Response Time
1% of full scale -
10% of full scale -
Marking speed 0.7m/s
Positioning speed 1.2m/s
Writing Speed
Good quality -
High quality -
Repeatability <15urad
Drift over 8 hours <0.1mrad
After 30min Warm-Up and With Water Cooling
Typical scan angle 40 degrees
Interface xY2-100 Enhanced
Operating temperature 25±10℃
Power requirements ±15VDC,150W
Driver mode Digital
Resolution 16Bit
Max laser power >2500W
Z Specifications
Maximum lens travel ±1.5mm
Tracking error time 1ms
Typical travel speed 140mm/s
Repeatability 1um
Long-term drift 6um
General Specifications
Aperture 16mm
Power requirements ±15VDC,Max 10A
Operating temperature 25±10℃
Typical scan angle 40 degrees
Interface XY2-100
Working Filed & Spot Diameter
Spot diameter(um) Working distance(mm) Resolution(um)
Working dimension(mm) CO2
200×200 - - 3
400×400 - - 6
600×600 225 737 9
800×800 295 1012 12
1000×1000 367 1287 15
1200×1200 431 1561 18
1400×1400 498 1836 21
Working dimension(mm) YAG
200×200 - - 3
400×400 - - 6
600×600 23 737 9
800×800 30 1012 12
1000×1000 38 1287 15
1200×1200 45 1561 18
1400×1400 53 1836 21
Product detail pictures:

OEM Supply Laser Etching Engraving - 3D Dynamic Focusing Laser Galvo Scanner Head | Without F-theta – JCZ detail pictures

OEM Supply Laser Etching Engraving - 3D Dynamic Focusing Laser Galvo Scanner Head | Without F-theta – JCZ detail pictures

OEM Supply Laser Etching Engraving - 3D Dynamic Focusing Laser Galvo Scanner Head | Without F-theta – JCZ detail pictures

Related Product Guide:
All we do is usually connected with our tenet Customer to start with, Rely on initial, devoting on the food packaging and environmental protection for OEM Supply Laser Etching Engraving - 3D Dynamic Focusing Laser Galvo Scanner Head | Without F-theta – JCZ , The product will supply to all over the world, such as: Ecuador, Curacao, Hungary, We adopt advanced production equipment and technology, and perfect testing equipment and methods to ensure our product quality. With our high-level talents, scientific management, excellent teams, and attentive service, our merchandise are favored by domestic and foreign customers. With your support, we'll build a better tomorrow!
    • High production efficiency and good product quality, fast delivery and completed after-sale protection, a right choice, a best choice.
    5 Stars By Arthur from European - 2018.03.03 13:09
    The sales manager has a good English level and skilled professional knowledge, we have a good communication. He is a warm and cheerful man, we have a pleasant cooperation and we became very good friends in private.
    5 Stars By Alan from Lebanon - 2018.11.04 10:32

    Products categories