Original Factory Co2 Laser Marking Delrin - 3D Dynamic Focusing Laser Galvo Scanner Head | Without F-theta – JCZ
Original Factory Co2 Laser Marking Delrin - 3D Dynamic Focusing Laser Galvo Scanner Head | Without F-theta – JCZ Detail:
3 Axis X Y Z Laser Galvo Scanning Head without F-theta Lens for Large Field 2D and 3D surface marking, cutting…
The 3D dynamic focusing laser galvo is applied to laser cutting, laser scribing, welding, drilling, additive manufacturing, mould texture, relief engraving, auto-hub material-removing….
Available Laser Resource: 355, 532,1064,10640nm etc.
Product Picture
Specification
20 Series
30 Series
50 Series
20 Series
20 Series | ||||||
XY Specifications | ||||||
Aperture | 20mm | |||||
Beam displacement | 26.5mm | |||||
Tracking error time | 360us | |||||
Offset drift | 30urad/K | |||||
Gain drift | 50ppm/K | |||||
Step Response Time | ||||||
1% of full scale | - | |||||
10% of full scale | - | |||||
Marking speed | 1m/s | |||||
Positioning speed | 6m/s | |||||
Writing Speed |
||||||
Good quality | 320cps | |||||
High quality | 210cps | |||||
Repeatability | <15urad | |||||
Drift over 8 hours | <0.1mrad | |||||
After 30min Warm-Up and With Water Cooling | ||||||
Typical scan angle | 40 degrees | |||||
Interface | XY2-100 | |||||
Operating temperature | 25±10℃ | |||||
Power requirements | ±15VDC,150W | |||||
Driver mode | Digital | |||||
Resolution | 16Bit | |||||
Max laser power | 1000w | |||||
Z Specifications | ||||||
Maximum lens travel | ±1.5mm | |||||
Tracking error time | 1ms | |||||
Typical travel speed | 140mm/s | |||||
Repeatability | 1um | |||||
Long-term drift | 6um | |||||
General Specifications | ||||||
Aperture | 9mm | |||||
Power requirements | ±15VDC,Max 10A | |||||
Operating temperature | 25±10℃ | |||||
Typical scan angle | 40 degrees | |||||
Interface | XY2-100 | |||||
Working Filed & Spot Diameter | ||||||
Spot diameter(um) | Working distance(mm) | Resolution(um) | ||||
Working dimension(mm) | CO2 | |||||
200×200 | 214 | 228 | 3 | |||
400×400 | 402 | 502 | 6 | |||
600×600 | 589 | 777 | 9 | |||
800×800 | 683 | 915 | 12 | |||
1000×1000 | - | - | 15 | |||
1200×1200 | - | - | 18 | |||
1400×1400 | - | - | 21 | |||
Working dimension(mm) | YAG | |||||
200×200 | 20 | 228 | 3 | |||
400×400 | 39 | 502 | 6 | |||
600×600 | 59 | 777 | 9 | |||
800×800 | - | - | 12 | |||
1000×1000 | - | - | 15 | |||
1200×1200 | - | - | 18 | |||
1400×1400 | - | - | 21 |
30 Series
30 Series | ||||||
XY Specifications | ||||||
Aperture | 30mm | |||||
Beam displacement | 36.5mm | |||||
Tracking error time | 550us | |||||
Offset drift | 30urad/K | |||||
Gain drift | 50ppm/K | |||||
Step Response Time | ||||||
1% of full scale | - | |||||
10% of full scale | - | |||||
Marking speed | 0.7m/s | |||||
Positioning speed | 3m/s | |||||
Writing Speed | ||||||
Good quality | 220cps | |||||
High quality | 150cps | |||||
Repeatability | <15urad | |||||
Drift over 8 hours | <0.1mrad | |||||
After 30min Warm-Up and With Water Cooling | ||||||
Typical scan angle | 40 degrees | |||||
Interface | xY2-100 Enhanced | |||||
Operating temperature | 25±10℃ | |||||
Power requirements | ±15VDC,150W | |||||
Driver mode | Digital | |||||
Resolution | 16Bit | |||||
Max laser power | 2500w | |||||
Z Specifications | ||||||
Maximum lens travel | ±1.5mm | |||||
Tracking error time | 1ms | |||||
Typical travel speed | 140mm/s | |||||
Repeatability | 1um | |||||
Long-term drift | 6um | |||||
General Specifications | ||||||
Aperture | 9mm | |||||
Power requiremerns | ±15VDC,Max 10A | |||||
Operating temperature | 25±10℃ | |||||
Typical scan angle | 40 dgerees | |||||
Interface | XY2-100 | |||||
Working Filed & Spot Diameter | ||||||
Spot diameter(um) | Working distance(mm) | Resolution(um) | ||||
Working dimension(mm) | CO2 | |||||
200×200 | - | - | 3 | |||
400×400 | 247 | 502 | 6 | |||
600×600 | 367 | 777 | 9 | |||
800×800 | 428 | 915 | 12 | |||
1000×1000 | 607 | 1327 | 15 | |||
1200×1200 | - | - | 18 | |||
1400×1400 | - | - | 21 | |||
Working dimension(mm) | YAG | |||||
200×200 | - | - | 3 | |||
400×400 | 26 | 502 | 6 | |||
600×600 | 38 | 777 | 9 | |||
800×800 | 45 | 915 | 12 | |||
1000×1000 | - | - | 15 | |||
1200×1200 | - | - | 18 | |||
1400×1400 | - | - | 21 |
50 Series
50 Series | ||||||
XY Specifications | ||||||
Aperture | 50mm | |||||
Beam displacement | 58mm | |||||
Tracking error time | 1.8ms | |||||
Offset drift | 30urad/K | |||||
Gain drift | 50ppm/K | |||||
Step Response Time | ||||||
1% of full scale | - | |||||
10% of full scale | - | |||||
Marking speed | 0.7m/s | |||||
Positioning speed | 1.2m/s | |||||
Writing Speed | ||||||
Good quality | - | |||||
High quality | - | |||||
Repeatability | <15urad | |||||
Drift over 8 hours | <0.1mrad | |||||
After 30min Warm-Up and With Water Cooling | ||||||
Typical scan angle | 40 degrees | |||||
Interface | xY2-100 Enhanced | |||||
Operating temperature | 25±10℃ | |||||
Power requirements | ±15VDC,150W | |||||
Driver mode | Digital | |||||
Resolution | 16Bit | |||||
Max laser power | >2500W | |||||
Z Specifications | ||||||
Maximum lens travel | ±1.5mm | |||||
Tracking error time | 1ms | |||||
Typical travel speed | 140mm/s | |||||
Repeatability | 1um | |||||
Long-term drift | 6um | |||||
General Specifications | ||||||
Aperture | 16mm | |||||
Power requirements | ±15VDC,Max 10A | |||||
Operating temperature | 25±10℃ | |||||
Typical scan angle | 40 degrees | |||||
Interface | XY2-100 | |||||
Working Filed & Spot Diameter | ||||||
Spot diameter(um) | Working distance(mm) | Resolution(um) | ||||
Working dimension(mm) | CO2 | |||||
200×200 | - | - | 3 | |||
400×400 | - | - | 6 | |||
600×600 | 225 | 737 | 9 | |||
800×800 | 295 | 1012 | 12 | |||
1000×1000 | 367 | 1287 | 15 | |||
1200×1200 | 431 | 1561 | 18 | |||
1400×1400 | 498 | 1836 | 21 | |||
Working dimension(mm) | YAG | |||||
200×200 | - | - | 3 | |||
400×400 | - | - | 6 | |||
600×600 | 23 | 737 | 9 | |||
800×800 | 30 | 1012 | 12 | |||
1000×1000 | 38 | 1287 | 15 | |||
1200×1200 | 45 | 1561 | 18 | |||
1400×1400 | 53 | 1836 | 21 |
Product detail pictures:
Related Product Guide:
continue to enhance, to be certain solution top quality in line with market and buyer standard requirements. Our corporation has a excellent assurance program are actually established for Original Factory Co2 Laser Marking Delrin - 3D Dynamic Focusing Laser Galvo Scanner Head | Without F-theta – JCZ , The product will supply to all over the world, such as: Bulgaria, Senegal, Mexico, We focus on providing service for our clients as a key element in strengthening our long-term relationships. Our continual availability of high grade products in combination with our excellent pre-sale and after-sales service ensures strong competitiveness in an increasingly globalized market.
By Miriam from Sri Lanka - 2018.11.02 11:11
The accounts manager made a detailed introduction about the product, so that we have a comprehensive understanding of the product, and ultimately we decided to cooperate.
By Beulah from Vietnam - 2018.12.05 13:53