Professional China Smd Trimmer Potentiometer - 3D Dynamic Focusing Laser Galvo Scanner Head | Without F-theta – JCZ
Professional China Smd Trimmer Potentiometer - 3D Dynamic Focusing Laser Galvo Scanner Head | Without F-theta – JCZ Detail:
3 Axis X Y Z Laser Galvo Scanning Head without F-theta Lens for Large Field 2D and 3D surface marking, cutting…
The 3D dynamic focusing laser galvo is applied to laser cutting, laser scribing, welding, drilling, additive manufacturing, mould texture, relief engraving, auto-hub material-removing….
Available Laser Resource: 355, 532,1064,10640nm etc.
Product Picture
Specification
20 Series
30 Series
50 Series
20 Series
| 20 Series | ||||||
| XY Specifications | ||||||
| Aperture | 20mm | |||||
| Beam displacement | 26.5mm | |||||
| Tracking error time | 360us | |||||
| Offset drift | 30urad/K | |||||
| Gain drift | 50ppm/K | |||||
| Step Response Time | ||||||
| 1% of full scale | - | |||||
| 10% of full scale | - | |||||
| Marking speed | 1m/s | |||||
| Positioning speed | 6m/s | |||||
| Writing Speed |
||||||
| Good quality | 320cps | |||||
| High quality | 210cps | |||||
| Repeatability | <15urad | |||||
| Drift over 8 hours | <0.1mrad | |||||
| After 30min Warm-Up and With Water Cooling | ||||||
| Typical scan angle | 40 degrees | |||||
| Interface | XY2-100 | |||||
| Operating temperature | 25±10℃ | |||||
| Power requirements | ±15VDC,150W | |||||
| Driver mode | Digital | |||||
| Resolution | 16Bit | |||||
| Max laser power | 1000w | |||||
| Z Specifications | ||||||
| Maximum lens travel | ±1.5mm | |||||
| Tracking error time | 1ms | |||||
| Typical travel speed | 140mm/s | |||||
| Repeatability | 1um | |||||
| Long-term drift | 6um | |||||
| General Specifications | ||||||
| Aperture | 9mm | |||||
| Power requirements | ±15VDC,Max 10A | |||||
| Operating temperature | 25±10℃ | |||||
| Typical scan angle | 40 degrees | |||||
| Interface | XY2-100 | |||||
| Working Filed & Spot Diameter | ||||||
| Spot diameter(um) | Working distance(mm) | Resolution(um) | ||||
| Working dimension(mm) | CO2 | |||||
| 200×200 | 214 | 228 | 3 | |||
| 400×400 | 402 | 502 | 6 | |||
| 600×600 | 589 | 777 | 9 | |||
| 800×800 | 683 | 915 | 12 | |||
| 1000×1000 | - | - | 15 | |||
| 1200×1200 | - | - | 18 | |||
| 1400×1400 | - | - | 21 | |||
| Working dimension(mm) | YAG | |||||
| 200×200 | 20 | 228 | 3 | |||
| 400×400 | 39 | 502 | 6 | |||
| 600×600 | 59 | 777 | 9 | |||
| 800×800 | - | - | 12 | |||
| 1000×1000 | - | - | 15 | |||
| 1200×1200 | - | - | 18 | |||
| 1400×1400 | - | - | 21 | |||
30 Series
| 30 Series | ||||||
| XY Specifications | ||||||
| Aperture | 30mm | |||||
| Beam displacement | 36.5mm | |||||
| Tracking error time | 550us | |||||
| Offset drift | 30urad/K | |||||
| Gain drift | 50ppm/K | |||||
| Step Response Time | ||||||
| 1% of full scale | - | |||||
| 10% of full scale | - | |||||
| Marking speed | 0.7m/s | |||||
| Positioning speed | 3m/s | |||||
| Writing Speed | ||||||
| Good quality | 220cps | |||||
| High quality | 150cps | |||||
| Repeatability | <15urad | |||||
| Drift over 8 hours | <0.1mrad | |||||
| After 30min Warm-Up and With Water Cooling | ||||||
| Typical scan angle | 40 degrees | |||||
| Interface | xY2-100 Enhanced | |||||
| Operating temperature | 25±10℃ | |||||
| Power requirements | ±15VDC,150W | |||||
| Driver mode | Digital | |||||
| Resolution | 16Bit | |||||
| Max laser power | 2500w | |||||
| Z Specifications | ||||||
| Maximum lens travel | ±1.5mm | |||||
| Tracking error time | 1ms | |||||
| Typical travel speed | 140mm/s | |||||
| Repeatability | 1um | |||||
| Long-term drift | 6um | |||||
| General Specifications | ||||||
| Aperture | 9mm | |||||
| Power requiremerns | ±15VDC,Max 10A | |||||
| Operating temperature | 25±10℃ | |||||
| Typical scan angle | 40 dgerees | |||||
| Interface | XY2-100 | |||||
| Working Filed & Spot Diameter | ||||||
| Spot diameter(um) | Working distance(mm) | Resolution(um) | ||||
| Working dimension(mm) | CO2 | |||||
| 200×200 | - | - | 3 | |||
| 400×400 | 247 | 502 | 6 | |||
| 600×600 | 367 | 777 | 9 | |||
| 800×800 | 428 | 915 | 12 | |||
| 1000×1000 | 607 | 1327 | 15 | |||
| 1200×1200 | - | - | 18 | |||
| 1400×1400 | - | - | 21 | |||
| Working dimension(mm) | YAG | |||||
| 200×200 | - | - | 3 | |||
| 400×400 | 26 | 502 | 6 | |||
| 600×600 | 38 | 777 | 9 | |||
| 800×800 | 45 | 915 | 12 | |||
| 1000×1000 | - | - | 15 | |||
| 1200×1200 | - | - | 18 | |||
| 1400×1400 | - | - | 21 | |||
50 Series
| 50 Series | ||||||
| XY Specifications | ||||||
| Aperture | 50mm | |||||
| Beam displacement | 58mm | |||||
| Tracking error time | 1.8ms | |||||
| Offset drift | 30urad/K | |||||
| Gain drift | 50ppm/K | |||||
| Step Response Time | ||||||
| 1% of full scale | - | |||||
| 10% of full scale | - | |||||
| Marking speed | 0.7m/s | |||||
| Positioning speed | 1.2m/s | |||||
| Writing Speed | ||||||
| Good quality | - | |||||
| High quality | - | |||||
| Repeatability | <15urad | |||||
| Drift over 8 hours | <0.1mrad | |||||
| After 30min Warm-Up and With Water Cooling | ||||||
| Typical scan angle | 40 degrees | |||||
| Interface | xY2-100 Enhanced | |||||
| Operating temperature | 25±10℃ | |||||
| Power requirements | ±15VDC,150W | |||||
| Driver mode | Digital | |||||
| Resolution | 16Bit | |||||
| Max laser power | >2500W | |||||
| Z Specifications | ||||||
| Maximum lens travel | ±1.5mm | |||||
| Tracking error time | 1ms | |||||
| Typical travel speed | 140mm/s | |||||
| Repeatability | 1um | |||||
| Long-term drift | 6um | |||||
| General Specifications | ||||||
| Aperture | 16mm | |||||
| Power requirements | ±15VDC,Max 10A | |||||
| Operating temperature | 25±10℃ | |||||
| Typical scan angle | 40 degrees | |||||
| Interface | XY2-100 | |||||
| Working Filed & Spot Diameter | ||||||
| Spot diameter(um) | Working distance(mm) | Resolution(um) | ||||
| Working dimension(mm) | CO2 | |||||
| 200×200 | - | - | 3 | |||
| 400×400 | - | - | 6 | |||
| 600×600 | 225 | 737 | 9 | |||
| 800×800 | 295 | 1012 | 12 | |||
| 1000×1000 | 367 | 1287 | 15 | |||
| 1200×1200 | 431 | 1561 | 18 | |||
| 1400×1400 | 498 | 1836 | 21 | |||
| Working dimension(mm) | YAG | |||||
| 200×200 | - | - | 3 | |||
| 400×400 | - | - | 6 | |||
| 600×600 | 23 | 737 | 9 | |||
| 800×800 | 30 | 1012 | 12 | |||
| 1000×1000 | 38 | 1287 | 15 | |||
| 1200×1200 | 45 | 1561 | 18 | |||
| 1400×1400 | 53 | 1836 | 21 | |||
Product detail pictures:
Related Product Guide:
We thinks what clients think, the urgency of urgency to act from the interests of a purchaser position of principle, allowing for greater top quality, decrease processing costs, price ranges are much more reasonable, won the new and aged prospects the support and affirmation for Professional China Smd Trimmer Potentiometer - 3D Dynamic Focusing Laser Galvo Scanner Head | Without F-theta – JCZ , The product will supply to all over the world, such as: United States, Austria, Danish, We supply professional service, prompt reply, timely delivery, excellent quality and best price to our customers. Satisfaction and good credit to every customer is our priority. We focus on every detail of order processing for customers till they have received safe and sound products with good logistics service and economical cost. Depending on this, our products are sold very well in the countries in Africa, the Mid-East and Southeast Asia. Adhering to the business philosophy of ‘customer first, forge ahead', we sincerely welcome clients from at home and abroad to cooperate with us.
By Miriam from Plymouth - 2017.09.28 18:29
This supplier's raw material quality is stable and reliable, has always been in accordance with the requirements of our company to provide the goods that quality meet our requirements.
By Megan from Boston - 2017.05.02 11:33
