professional factory for Co2 Laser Marking Plastic - 3D Dynamic Focusing Laser Galvo Scanner Head | Without F-theta – JCZ
professional factory for Co2 Laser Marking Plastic - 3D Dynamic Focusing Laser Galvo Scanner Head | Without F-theta – JCZ Detail:
3 Axis X Y Z Laser Galvo Scanning Head without F-theta Lens for Large Field 2D and 3D surface marking, cutting…
The 3D dynamic focusing laser galvo is applied to laser cutting, laser scribing, welding, drilling, additive manufacturing, mould texture, relief engraving, auto-hub material-removing….
Available Laser Resource: 355, 532,1064,10640nm etc.
Product Picture
Specification
20 Series
30 Series
50 Series
20 Series
20 Series | ||||||
XY Specifications | ||||||
Aperture | 20mm | |||||
Beam displacement | 26.5mm | |||||
Tracking error time | 360us | |||||
Offset drift | 30urad/K | |||||
Gain drift | 50ppm/K | |||||
Step Response Time | ||||||
1% of full scale | - | |||||
10% of full scale | - | |||||
Marking speed | 1m/s | |||||
Positioning speed | 6m/s | |||||
Writing Speed |
||||||
Good quality | 320cps | |||||
High quality | 210cps | |||||
Repeatability | <15urad | |||||
Drift over 8 hours | <0.1mrad | |||||
After 30min Warm-Up and With Water Cooling | ||||||
Typical scan angle | 40 degrees | |||||
Interface | XY2-100 | |||||
Operating temperature | 25±10℃ | |||||
Power requirements | ±15VDC,150W | |||||
Driver mode | Digital | |||||
Resolution | 16Bit | |||||
Max laser power | 1000w | |||||
Z Specifications | ||||||
Maximum lens travel | ±1.5mm | |||||
Tracking error time | 1ms | |||||
Typical travel speed | 140mm/s | |||||
Repeatability | 1um | |||||
Long-term drift | 6um | |||||
General Specifications | ||||||
Aperture | 9mm | |||||
Power requirements | ±15VDC,Max 10A | |||||
Operating temperature | 25±10℃ | |||||
Typical scan angle | 40 degrees | |||||
Interface | XY2-100 | |||||
Working Filed & Spot Diameter | ||||||
Spot diameter(um) | Working distance(mm) | Resolution(um) | ||||
Working dimension(mm) | CO2 | |||||
200×200 | 214 | 228 | 3 | |||
400×400 | 402 | 502 | 6 | |||
600×600 | 589 | 777 | 9 | |||
800×800 | 683 | 915 | 12 | |||
1000×1000 | - | - | 15 | |||
1200×1200 | - | - | 18 | |||
1400×1400 | - | - | 21 | |||
Working dimension(mm) | YAG | |||||
200×200 | 20 | 228 | 3 | |||
400×400 | 39 | 502 | 6 | |||
600×600 | 59 | 777 | 9 | |||
800×800 | - | - | 12 | |||
1000×1000 | - | - | 15 | |||
1200×1200 | - | - | 18 | |||
1400×1400 | - | - | 21 |
30 Series
30 Series | ||||||
XY Specifications | ||||||
Aperture | 30mm | |||||
Beam displacement | 36.5mm | |||||
Tracking error time | 550us | |||||
Offset drift | 30urad/K | |||||
Gain drift | 50ppm/K | |||||
Step Response Time | ||||||
1% of full scale | - | |||||
10% of full scale | - | |||||
Marking speed | 0.7m/s | |||||
Positioning speed | 3m/s | |||||
Writing Speed | ||||||
Good quality | 220cps | |||||
High quality | 150cps | |||||
Repeatability | <15urad | |||||
Drift over 8 hours | <0.1mrad | |||||
After 30min Warm-Up and With Water Cooling | ||||||
Typical scan angle | 40 degrees | |||||
Interface | xY2-100 Enhanced | |||||
Operating temperature | 25±10℃ | |||||
Power requirements | ±15VDC,150W | |||||
Driver mode | Digital | |||||
Resolution | 16Bit | |||||
Max laser power | 2500w | |||||
Z Specifications | ||||||
Maximum lens travel | ±1.5mm | |||||
Tracking error time | 1ms | |||||
Typical travel speed | 140mm/s | |||||
Repeatability | 1um | |||||
Long-term drift | 6um | |||||
General Specifications | ||||||
Aperture | 9mm | |||||
Power requiremerns | ±15VDC,Max 10A | |||||
Operating temperature | 25±10℃ | |||||
Typical scan angle | 40 dgerees | |||||
Interface | XY2-100 | |||||
Working Filed & Spot Diameter | ||||||
Spot diameter(um) | Working distance(mm) | Resolution(um) | ||||
Working dimension(mm) | CO2 | |||||
200×200 | - | - | 3 | |||
400×400 | 247 | 502 | 6 | |||
600×600 | 367 | 777 | 9 | |||
800×800 | 428 | 915 | 12 | |||
1000×1000 | 607 | 1327 | 15 | |||
1200×1200 | - | - | 18 | |||
1400×1400 | - | - | 21 | |||
Working dimension(mm) | YAG | |||||
200×200 | - | - | 3 | |||
400×400 | 26 | 502 | 6 | |||
600×600 | 38 | 777 | 9 | |||
800×800 | 45 | 915 | 12 | |||
1000×1000 | - | - | 15 | |||
1200×1200 | - | - | 18 | |||
1400×1400 | - | - | 21 |
50 Series
50 Series | ||||||
XY Specifications | ||||||
Aperture | 50mm | |||||
Beam displacement | 58mm | |||||
Tracking error time | 1.8ms | |||||
Offset drift | 30urad/K | |||||
Gain drift | 50ppm/K | |||||
Step Response Time | ||||||
1% of full scale | - | |||||
10% of full scale | - | |||||
Marking speed | 0.7m/s | |||||
Positioning speed | 1.2m/s | |||||
Writing Speed | ||||||
Good quality | - | |||||
High quality | - | |||||
Repeatability | <15urad | |||||
Drift over 8 hours | <0.1mrad | |||||
After 30min Warm-Up and With Water Cooling | ||||||
Typical scan angle | 40 degrees | |||||
Interface | xY2-100 Enhanced | |||||
Operating temperature | 25±10℃ | |||||
Power requirements | ±15VDC,150W | |||||
Driver mode | Digital | |||||
Resolution | 16Bit | |||||
Max laser power | >2500W | |||||
Z Specifications | ||||||
Maximum lens travel | ±1.5mm | |||||
Tracking error time | 1ms | |||||
Typical travel speed | 140mm/s | |||||
Repeatability | 1um | |||||
Long-term drift | 6um | |||||
General Specifications | ||||||
Aperture | 16mm | |||||
Power requirements | ±15VDC,Max 10A | |||||
Operating temperature | 25±10℃ | |||||
Typical scan angle | 40 degrees | |||||
Interface | XY2-100 | |||||
Working Filed & Spot Diameter | ||||||
Spot diameter(um) | Working distance(mm) | Resolution(um) | ||||
Working dimension(mm) | CO2 | |||||
200×200 | - | - | 3 | |||
400×400 | - | - | 6 | |||
600×600 | 225 | 737 | 9 | |||
800×800 | 295 | 1012 | 12 | |||
1000×1000 | 367 | 1287 | 15 | |||
1200×1200 | 431 | 1561 | 18 | |||
1400×1400 | 498 | 1836 | 21 | |||
Working dimension(mm) | YAG | |||||
200×200 | - | - | 3 | |||
400×400 | - | - | 6 | |||
600×600 | 23 | 737 | 9 | |||
800×800 | 30 | 1012 | 12 | |||
1000×1000 | 38 | 1287 | 15 | |||
1200×1200 | 45 | 1561 | 18 | |||
1400×1400 | 53 | 1836 | 21 |
Product detail pictures:
Related Product Guide:
We not only will try our greatest to offer you excellent services to each individual client, but also are ready to receive any suggestion offered by our buyers for professional factory for Co2 Laser Marking Plastic - 3D Dynamic Focusing Laser Galvo Scanner Head | Without F-theta – JCZ , The product will supply to all over the world, such as: Pretoria, Paraguay, panama, We now have to continue to uphold the quality, detailed, efficient business philosophy of honest, responsible, innovativespirit of service, abide by the contract and abide by reputation, first-class goods and improve service welcome overseas customers patrons.
By Ivan from Canada - 2017.09.16 13:44
It is really lucky to meet such a good supplier, this is our most satisfied cooperation, I think we will work again!
By Maria from Karachi - 2017.10.27 12:12